Internet Router Hardware Guide

Safety and Regulatory Compliance Information
¡Atención! El equipo está diseñado para trabajar con sistemas de alimentación
tipo TN, IT.
Varning! Enheten är konstruerad för användning tillsammans med elkraftssystem
av TN-, IT-typ.
Installation Safety Guidelines and Warnings
Observe the following guidelines and warnings before and during router installation:
Chassis Lifting Guidelines on page 239
Installation Instructions Warning on page 239
Rack-Mounting Requirements and Warnings on page 240
Ramp Warning on page 244
Chassis Lifting Guidelines
The w eight of a fully configured chassis is about 370.5 lb (168 kg). Observe
the following guidelines for lifting and moving the router:
Before moving the router, read the guidelines in “Preparing for Router
Installation” on page 59 to verify that the intended site meets the specified
power, environmental, and clearance requirements.
Do not attempt to lift a fully configured router by yourself. Using a mechanical
lift to maneuver the router int o a rack is recommended. If a lift cannot be
used, a minimum of three people must lift the router, and you must remove
components from the chassis before lifting. For lifting and component removal
instructions, see “Initial Installation” on page 57.
Before lifting or moving the router, disconnect all external cables.
As when lifting any heavy object, lift most of the weight with y our legs rather
than your back. Keep your knees bent and your back relatively straight and
avoid twisting your body as you l ift. Balance the load evenly and be sure
that your footing is solid.
Installation Instr uctions Warning
WARNING: Read the installation instructions before you connect the router to
apowersource.
Waarschuwing Raadpleeg de installatie-aanwijzingen voordat u het systeem met
de voeding verbindt.
Safety Guidelines and Warnings 239