Internet Router Hardware Guide

M160 Internet Router Hardware Guide
Figure 83: Removing the PC Card
1926
Eject button
PCG 0
SFM 0
SFM 1
MCS 0
RE 0
Insert the PC Card
To insert the PC card, follow this procedure (see Figure 84):
1. Orient the PC card with the Juniper Networks logo facing in the direction
specified on the Routing Engine faceplate. Insert the card into the slot.
2. Press the card firmly all the way into the slot. Note that the PC card slot might
be located in a different position from that sho wn in Figure 84.
3. Reinstall the rear component cover and tighten the thumbscrew at each corner
to secure it to the chassis. For complete instructions, see “Reinstalling the Rear
Component Cover” on page 109.
CAUTION: To maintain proper airflow and provide electromagnetic shielding, do
not operate the router without the rear component cover in place.
164 R eplacing Host Module Com ponents