Internet Router Hardware Guide

Connecting the R outer and Performing Initial Configuration
}
}
interfaces {
fxp0 {
unit 0 {
family inet {
address address/prefix-length ;
}
}
}
}
12. Commit the configuration to activate it on the r outer.
[edit]
root@# commit
13. Optionally, configure additional properties by adding the necessary
configuration statements. Then commit the changes to activate them on
the router.
[edit]
root@host# commit
14. When you have finished configuring the router, exit configuration mode.
[edit]
root@host# exit
root@host>
Configuring the JUNOS Internet Software 123