Network Router User Manual
Table Of Contents
- FPCs Supported
- PIC/FPC Compatibility
- Adaptive Services II PIC
- Adaptive Services II Layer 2 Services PIC
- ATM2 E3 IQ PIC
- ATM2 OC3/STM1 IQ PIC
- ATM2 OC12/STM4 IQ PICs
- ATM2 OC48/STM16 IQ PIC with SFP
- Channelized DS3 IQ PIC
- Channelized OC3 IQ PIC
- Channelized OC12 IQ PIC
- Channelized STM1 IQ PIC
- DS3 PIC
- E3 IQ PIC
- Fast Ethernet PIC
- Gigabit Ethernet PICs with SFP
- Gigabit Ethernet IQ PICs with SFP
- Gigabit Ethernet IQ2 PICs with SFP
- 10-Gigabit Ethernet IQ2 PIC with XFP
- 10-Gigabit Ethernet PIC with XENPAK
- 10-Gigabit Ethernet LAN/WAN PIC with XFP
- 10-Gigabit Ethernet DWDM PIC
- Monitoring Services II PIC
- Monitoring Services III PIC
- MultiServices PICs
- SONET/SDH OC3c/STM1 PIC
- SONET/SDH OC3/STM1 (Multi-Rate) PICs with SFP
- SONET/SDH OC12c/STM4 PIC
- SONET/SDH OC12/STM4 (Multi-Rate) PICs with SFP
- SONET/SDH OC48c/STM16 PIC with SFP
- SONET/SDH OC48/STM16 (Multi-Rate) PIC with SFP
- SONET/SDH OC192c/STM64 PIC
- SONET/SDH OC192c/STM64 PICs with XFP
- SONET/SDH OC768c/STM256 PIC
- Tunnel Services PIC
- 40-Gigabit Tunnel Services PIC
- High Availability Features
SONET/SDH OC48c/STM16 PIC with SFP
■
JUNOS 8.5 and laterSoftware release
■
Four OC48 ports
■
Power requirement: 0.46 A @ 48 V (22.1 W)
Description
■
Multiplexing and demultiplexing on the 1-port PIC
■
Rate policing on input
■
Rate shaping on output
■
Packet buffering, Layer 2 parsing
Hardware features
■
Optical diagnostics and related alarms
■
Configuration of SONET or SDH framing on a per-port basis
■
SONET/SDH framing
■
Link aggregation
■
Alarm and event counting and detection
■
Dual-router automatic protection switching (APS)
■
Multiprotocol Label Switching (MPLS) fast reroute
■
Encapsulations:
■
High-Level Data Link Control (HDLC)
■
Frame Relay
■
Circuit cross-connect (CCC)
■
Translational cross-connect (TCC)
■
Point-to-Point Protocol (PPP)
Software features
SONET/SDH OC48c/STM16 PIC with SFP ■ 89
SONET/SDH OC48c/STM16 PIC with SFP