Network Router User Manual
Table Of Contents
- FPCs Supported
- PIC/FPC Compatibility
- Adaptive Services II PIC
- Adaptive Services II Layer 2 Services PIC
- ATM2 E3 IQ PIC
- ATM2 OC3/STM1 IQ PIC
- ATM2 OC12/STM4 IQ PICs
- ATM2 OC48/STM16 IQ PIC with SFP
- Channelized DS3 IQ PIC
- Channelized OC3 IQ PIC
- Channelized OC12 IQ PIC
- Channelized STM1 IQ PIC
- DS3 PIC
- E3 IQ PIC
- Fast Ethernet PIC
- Gigabit Ethernet PICs with SFP
- Gigabit Ethernet IQ PICs with SFP
- Gigabit Ethernet IQ2 PICs with SFP
- 10-Gigabit Ethernet IQ2 PIC with XFP
- 10-Gigabit Ethernet PIC with XENPAK
- 10-Gigabit Ethernet LAN/WAN PIC with XFP
- 10-Gigabit Ethernet DWDM PIC
- Monitoring Services II PIC
- Monitoring Services III PIC
- MultiServices PICs
- SONET/SDH OC3c/STM1 PIC
- SONET/SDH OC3/STM1 (Multi-Rate) PICs with SFP
- SONET/SDH OC12c/STM4 PIC
- SONET/SDH OC12/STM4 (Multi-Rate) PICs with SFP
- SONET/SDH OC48c/STM16 PIC with SFP
- SONET/SDH OC48/STM16 (Multi-Rate) PIC with SFP
- SONET/SDH OC192c/STM64 PIC
- SONET/SDH OC192c/STM64 PICs with XFP
- SONET/SDH OC768c/STM256 PIC
- Tunnel Services PIC
- 40-Gigabit Tunnel Services PIC
- High Availability Features

Status LED, one bicolor:
■
Off—PIC ports not enabled
■
Green—PIC is operating normally
■
Red—PIC has an error or failure
4-port PIC—One pair of port LEDs:
■
Link LED—If green, the port is online; if there is no light, the port is down
■
RX LED—If flashing green, the port is receiving data; if there is no light, the port might
be on but is not receiving data
LEDs
Fast Ethernet PIC ■ 43
Fast Ethernet PIC