Network Router User Manual
Table Of Contents
- FPCs Supported
- PIC/FPC Compatibility
- Adaptive Services II PIC
- Adaptive Services II Layer 2 Services PIC
- ATM2 E3 IQ PIC
- ATM2 OC3/STM1 IQ PIC
- ATM2 OC12/STM4 IQ PICs
- ATM2 OC48/STM16 IQ PIC with SFP
- Channelized DS3 IQ PIC
- Channelized OC3 IQ PIC
- Channelized OC12 IQ PIC
- Channelized STM1 IQ PIC
- DS3 PIC
- E3 IQ PIC
- Fast Ethernet PIC
- Gigabit Ethernet PICs with SFP
- Gigabit Ethernet IQ PICs with SFP
- Gigabit Ethernet IQ2 PICs with SFP
- 10-Gigabit Ethernet IQ2 PIC with XFP
- 10-Gigabit Ethernet PIC with XENPAK
- 10-Gigabit Ethernet LAN/WAN PIC with XFP
- 10-Gigabit Ethernet DWDM PIC
- Monitoring Services II PIC
- Monitoring Services III PIC
- MultiServices PICs
- SONET/SDH OC3c/STM1 PIC
- SONET/SDH OC3/STM1 (Multi-Rate) PICs with SFP
- SONET/SDH OC12c/STM4 PIC
- SONET/SDH OC12/STM4 (Multi-Rate) PICs with SFP
- SONET/SDH OC48c/STM16 PIC with SFP
- SONET/SDH OC48/STM16 (Multi-Rate) PIC with SFP
- SONET/SDH OC192c/STM64 PIC
- SONET/SDH OC192c/STM64 PICs with XFP
- SONET/SDH OC768c/STM256 PIC
- Tunnel Services PIC
- 40-Gigabit Tunnel Services PIC
- High Availability Features

Adaptive Services II PIC
■
JUNOS 8.5 and later (Type 1)Software release
■
Supports tunnel services. This feature is included with the PIC and does not require an
individual license.
■
Individual licenses must be purchased for additional services.
■
Power requirement: 0.4 A @ 48 V (19 W)
Description
■
Support for up to 2000 service sets
■
Active monitoring on up to 1 million flows
■
Support for MTUs up to 9192 bytes for Gigabit Ethernet and SONET interfaces
Hardware features
Depending on your JUNOS release and individual licenses, software features for this PIC can
include the features listed in Table 13 on page 13. For more information about the software
features available for services PICs, see the JUNOS Services Interfaces Configuration Guide.
Software features
Status LED, one tricolor:
■
Off—PIC is offline and it is safe to remove it from the chassis.
■
Green—PIC is operating normally.
■
Amber—PIC is initializing.
■
Red—PIC has an error or failure and no further harm can be done by removing it from
the chassis.
Application LED, one bicolor:
■
Off—Service is not running.
■
Green—Service is running under acceptable load.
■
Amber—Service is overloaded.
LEDs
12 ■ Adaptive Services II PIC
T1600 Internet Routing Node PIC Guide