Network Router User Manual
Table Of Contents
- FPCs Supported
- PIC/FPC Compatibility
- Adaptive Services II PIC
- Adaptive Services II Layer 2 Services PIC
- ATM2 E3 IQ PIC
- ATM2 OC3/STM1 IQ PIC
- ATM2 OC12/STM4 IQ PICs
- ATM2 OC48/STM16 IQ PIC with SFP
- Channelized DS3 IQ PIC
- Channelized OC3 IQ PIC
- Channelized OC12 IQ PIC
- Channelized STM1 IQ PIC
- DS3 PIC
- E3 IQ PIC
- Fast Ethernet PIC
- Gigabit Ethernet PICs with SFP
- Gigabit Ethernet IQ PICs with SFP
- Gigabit Ethernet IQ2 PICs with SFP
- 10-Gigabit Ethernet IQ2 PIC with XFP
- 10-Gigabit Ethernet PIC with XENPAK
- 10-Gigabit Ethernet LAN/WAN PIC with XFP
- 10-Gigabit Ethernet DWDM PIC
- Monitoring Services II PIC
- Monitoring Services III PIC
- MultiServices PICs
- SONET/SDH OC3c/STM1 PIC
- SONET/SDH OC3/STM1 (Multi-Rate) PICs with SFP
- SONET/SDH OC12c/STM4 PIC
- SONET/SDH OC12/STM4 (Multi-Rate) PICs with SFP
- SONET/SDH OC48c/STM16 PIC with SFP
- SONET/SDH OC48/STM16 (Multi-Rate) PIC with SFP
- SONET/SDH OC192c/STM64 PIC
- SONET/SDH OC192c/STM64 PICs with XFP
- SONET/SDH OC768c/STM256 PIC
- Tunnel Services PIC
- 40-Gigabit Tunnel Services PIC
- High Availability Features
Table 44: Optical Interface Support for SONET/SDH OC768 PICs (continued)
Short Reach (SR)Optical Parameter
300-pin multi-source agreement (MSA)
ITU G.693 VSR2000–3R2
Standard
1.24 miles/2 kmMaximum distance
1530 through 1565 nmTransmitter wavelength
0 through +3 dBmAverage launch power
+3 dBmReceiver saturation
–6 dBmReceiver sensitivity
NOTE: The show interfaces diagnostics optics so-X/X/X command has the following tolerances:
■
Laser output power: +/– 1.5 dBm
■
Receiver signal average optical power: +/– 1.5 dBm
SONET/SDH OC768c/STM256 PIC ■ 109
SONET/SDH OC768c/STM256 PIC