Network Router User Manual
Table Of Contents
- FPCs Supported
- PIC/FPC Compatibility
- Adaptive Services II PIC
- Adaptive Services II Layer 2 Services PIC
- ATM2 E3 IQ PIC
- ATM2 OC3/STM1 IQ PIC
- ATM2 OC12/STM4 IQ PICs
- ATM2 OC48/STM16 IQ PIC with SFP
- Channelized DS3 IQ PIC
- Channelized OC3 IQ PIC
- Channelized OC12 IQ PIC
- Channelized STM1 IQ PIC
- DS3 PIC
- E3 IQ PIC
- Fast Ethernet PIC
- Gigabit Ethernet PICs with SFP
- Gigabit Ethernet IQ PICs with SFP
- Gigabit Ethernet IQ2 PICs with SFP
- 10-Gigabit Ethernet IQ2 PIC with XFP
- 10-Gigabit Ethernet PIC with XENPAK
- 10-Gigabit Ethernet LAN/WAN PIC with XFP
- 10-Gigabit Ethernet DWDM PIC
- Monitoring Services II PIC
- Monitoring Services III PIC
- MultiServices PICs
- SONET/SDH OC3c/STM1 PIC
- SONET/SDH OC3/STM1 (Multi-Rate) PICs with SFP
- SONET/SDH OC12c/STM4 PIC
- SONET/SDH OC12/STM4 (Multi-Rate) PICs with SFP
- SONET/SDH OC48c/STM16 PIC with SFP
- SONET/SDH OC48/STM16 (Multi-Rate) PIC with SFP
- SONET/SDH OC192c/STM64 PIC
- SONET/SDH OC192c/STM64 PICs with XFP
- SONET/SDH OC768c/STM256 PIC
- Tunnel Services PIC
- 40-Gigabit Tunnel Services PIC
- High Availability Features

■
SONET alarms:
■
Alarm indication signal—line (AIS-L)
■
Alarm indication signal—path (AIS-P)
■
Bit error rate signal degrade (BERR-SD)
■
Bit error rate signal fail (BERR-SF)
■
Bit interleaved parity (BIP) error B1
■
Bit interleaved parity (BIP) error B2
■
Bit interleaved parity (BIP) error B3
■
Loss of frame (LOF)
■
Loss of pointer (LOP-P)
■
Loss of signal (LOS)
■
Far-end bit error: remote error indication—line (REI-L) (CV-LFE)
■
Far-end bit error: remote error indication—path (REI-P) (CV-PFE)
■
Payload mismatch (path label mismatch) (PLM-P)
■
Payload unequipped (unequipped STS at path level) (UNEQ-P)
■
Remote defect indication—line (RDI-L)
■
Remote defect indication—path (RDI-P)
■
SDH alarms:
■
Multiplex section alarm indication signal (MS-AIS)
■
Administrative unit alarm indication signal (AU-AIS)
■
Bit error rate signal degrade (BERR-SD)
■
Bit error rate signal fail (BERR-SF)
■
Bit interleaved parity (BIP) error B1
■
Bit interleaved parity (BIP) error B2
■
Bit interleaved parity (BIP) error B3
■
Loss of frame (LOF)
■
Loss of pointer (HP-LOP)
■
Loss of signal (LOS)
■
Multiplex section remote error indication (MS-REI)
■
Higher path label mismatch (HP-PLM)
■
Higher path unequipped (HP-UNEQ)
■
Multiplex section remote defect indication (MS-RDI)
■
Higher path remote defect indication (HP-RDI)
■
Errored seconds (ES-S, ES-L, ES-P), far-end errored seconds (ES-LFE, ES-PFE), far-end
severely errored seconds (SES-LFE, SES-PFE), far-end unavailable seconds (UAS-LFE,
UAS-PFE)
■
Severely errored framing (SEF), severely errored framing seconds (SEFS-S), severely
errored seconds (SES-S, SES-L, SES-P), unavailable seconds (UAS-L, UAS-P)
Alarms, errors, and
events
Table 42: Optical Interface Support for the SONET/SDH OC192 PIC
Very Short Reach (VSR) 1 TransceiverParameter
Multimode; compatible with 12-ribbon multimode fiberOptical interface
FixedTransceiver type
100 ■ SONET/SDH OC192c/STM64 PIC
T1600 Internet Routing Node PIC Guide