Network Router User Manual

About This Guide
This preface provides the following guidelines for using the M10i Internet Router
Hardware Guide.
■ Objectives on page xvii
■ Audience on page xvii
■ Documentation Conventions on page xviii
■ List of Technical Publications on page xix
■ Documentation Feedback on page xxiii
■ Requesting Support on page xxiv
Objectives
This manual describes hardware installation and basic troubleshooting procedures
for the Juniper Networks M10i Internet Router. It explains how to prepare your site
for router installation, unpack and install the hardware, power on the router, perform
initial software configuration, and perform routine maintenance. After completing
the installation and basic configuration procedures covered in this manual, refer to
the JUNOS Internet software configuration guides for information about further JUNOS
software configuration.
NOTE: For additional information about Juniper Networks Internet routers and the
Physical Interface Cards (PICs) they support—either corrections to or information
that might have been omitted from this guide—see the hardware release notes at
http://www.juniper.net/.
Audience
This guide is designed for network administrators who are installing and maintaining
a Juniper Networks router or preparing a site for router installation. To use this guide,
you need a broad understanding of networks in general, the Internet in particular,
networking principles, and network configuration. Any detailed discussion of these
concepts is beyond the scope of this guide.
Objectives ■ xvii