Network Router User Manual

5. Align the rear of the Routing Engine with the guide rails inside the chassis and
slide it in completely.
CAUTION: Align the Routing Engine carefully with the guide rails and push it in
evenly. Damage can result if it gets lodged in the rails because of uneven movement.
6. Tighten the thumbscrews on the Routing Engine faceplate to secure the Routing
Engine.
7.
Issue the show chassis hardware command described in “Maintaining Hardware
Components” on page 73 to verify that the HCM is functioning correctly.
Figure 33: Installing the HCM
Figure 34: Installing a Routing Engine
Replacing a PIC
Up to eight regular PICs install into an M10i router, as shown in Figure 1. Quad-wide
PICs occupy all four slots in an FPC row.
96 ■ Replacing a PIC
M10i Internet Router Hardware Guide