J4350 and J6350 Services Router Getting Started Guide Release 8.1 Juniper Networks, Inc. 1194 North Mathilda Avenue Sunnyvale, California 94089 USA 408-745-2000 www.juniper.
This product includes the Envoy SNMP Engine, developed by Epilogue Technology, an Integrated Systems Company. Copyright © 1986-1997, Epilogue Technology Corporation. All rights reserved. This program and its documentation were developed at private expense, and no part of them is in the public domain. This product includes memory allocation software developed by Mark Moraes, copyright © 1988, 1989, 1993, University of Toronto.
End User License Agreement READ THIS END USER LICENSE AGREEMENT (“AGREEMENT”) BEFORE DOWNLOADING, INSTALLING, OR USING THE SOFTWARE. BY DOWNLOADING, INSTALLING, OR USING THE SOFTWARE OR OTHERWISE EXPRESSING YOUR AGREEMENT TO THE TERMS CONTAINED HEREIN, YOU (AS CUSTOMER OR IF YOU ARE NOT THE CUSTOMER, AS A REPRESENTATIVE/AGENT AUTHORIZED TO BIND THE CUSTOMER) CONSENT TO BE BOUND BY THIS AGREEMENT.
OR SERVICES, OR FOR ANY SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, THE SOFTWARE, OR ANY JUNIPER OR JUNIPER-SUPPLIED SOFTWARE. IN NO EVENT SHALL JUNIPER BE LIABLE FOR DAMAGES ARISING FROM UNAUTHORIZED OR IMPROPER USE OF ANY JUNIPER OR JUNIPER-SUPPLIED SOFTWARE.
Abbreviated Table of Contents About This Guide Part 1 xv J-series Overview Chapter 1 Overview of J4350 and J6350 Services Routers . . Chapter 2 System Overview . . Chapter 3 Physical Interface Modules Overview . . Chapter 4 Services Router User Interface Overview . . Part 2 3 9 27 49 Installing a Services Router Chapter 5 Preparing for Router Installation . . Chapter 6 Installing and Connecting a Services Router . . Chapter 7 Establishing Basic Connectivity . .
J4350 and J6350 Services Router Getting Started Guide Part 4 Part 5 vi J-series Requirements and Specifications Chapter 13 Network Cable Specifications and Connector Pinouts . . Chapter 14 Safety and Regulatory Compliance Information. .
Table of Contents About This Guide xv Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv Audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xvi Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
J4350 and J6350 Services Router Getting Started Guide Kernel and Microkernel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 JUNOS Software Processes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 User Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents Rack Size and Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Connection to Building Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Router Environmental Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Fire Safety Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
J4350 and J6350 Services Router Getting Started Guide Configuring Basic Settings with a Configuration Editor. . . . . . . . . . . . . . . . . . . . . . . . . 108 Verifying Basic Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 Displaying Basic Connectivity Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 Chapter 8 Configuring Secure Web Access 115 Secure Web Access Terms. . . . . . . . . . . . . . .
Table of Contents Part 3 Maintaining Services Router Hardware Chapter 11 Replacing and Troubleshooting Hardware Components 143 Replacing Hardware Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143 Tools and Parts Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144 Replacing the Console Port Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
J4350 and J6350 Services Router Getting Started Guide Part 4 J-series Requirements and Specifications Chapter 13 Network Cable Specifications and Connector Pinouts 185 Serial PIM Cable Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185 RS-232 DTE Cable Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186 RS-232 DCE Cable Pinout . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents Installation Instructions Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 Rack-Mounting Requirements and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . .222 Ramp Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .226 Laser and LED Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . .227 General Laser Safety Guidelines. . . . . . .
J4350 and J6350 Services Router Getting Started Guide xiv Table of Contents
About This Guide This preface provides the following guidelines for using the J4350 and J6350 Services Router Getting Started Guide: Objectives on page xv Audience on page xvi Document Conventions on page xvi Related Juniper Networks Documentation on page xviii Documentation Feedback on page xx Requesting Support on page xx Objectives This guide contains an overview, basic instructions, and specifications for J4350 and J6350 Services Routers.
J4350 and J6350 Services Router Getting Started Guide J-series Services Router guides provide complete instructions for using the J-Web interface, but they are not a comprehensive resource for using the JUNOS CLI. For CLI information, see the JUNOS software manuals listed in “Related Juniper Networks Documentation” on page xviii. Although the J-Web Interface User Guide provides a useful overview of the J-Web interface, it contains only a subset of J-Web information.
About This Guide Table 3: Text and Syntax Conventions Convention Description Examples Represents text that you type. To enter configuration mode, type the configure command: Bold sans serif typeface user@host> configure Fixed-width typeface Italic typeface Represents output that appears on the terminal screen. Introduces important new terms. user@host> show chassis alarms No alarms currently active A policy term is a named structure that defines match conditions and actions.
J4350 and J6350 Services Router Getting Started Guide Convention Description Examples Bold typeface Represents J-Web graphical user interface (GUI) items you click or select. In the Logical Interfaces box, select All Interfaces. To cancel the configuration, click Cancel. > (bold right angle bracket) Separates levels in a hierarchy of J-Web selections. In the configuration editor hierarchy, select Protocols>Ospf.
About This Guide Chapter in a J-series Guide Corresponding JUNOS Software Manual “Routing Overview” JUNOS Routing Protocols Configuration Guide “Configuring Static Routes” JUNOS Routing Protocols and Policies Command Reference “Configuring a RIP Network” “Configuring an OSPF Network” “Configuring the IS-IS Protocol” “Configuring BGP Sessions” J-series Services Router Advanced WAN Access Configuration Guide “Multiprotocol Label Switching Overview” JUNOS MPLS Applications Configuration Guide “Config
J4350 and J6350 Services Router Getting Started Guide Chapter in a J-series Guide Corresponding JUNOS Software Manual “Monitoring the Router and Routing Operations” JUNOS System Basics and Services Command Reference JUNOS Interfaces Command Reference JUNOS Routing Protocols and Policies Command Reference “Monitoring Events and Managing System Log Files” JUNOS System Log Messages Reference “Configuring and Monitoring Alarms” JUNOS System Basics Configuration Guide “Performing Software Upgrades and R
Part 1 J-series Overview Overview of J4350 and J6350 Services Routers on page 3 System Overview on page 9 Physical Interface Modules Overview on page 27 Services Router User Interface Overview on page 49 J-series Overview 1
2 J-series Overview
Chapter 1 Overview of J4350 and J6350 Services Routers J-series Services Routers provide stable, reliable, and efficient IP routing, WAN and LAN connectivity, and management services for small to medium-sized enterprise networks. Services Routers typically connect small, branch, or regional offices to a central site router, and link Internet service provider (ISP) networks. All J-series Services Routers run the JUNOS Internet software, which offers many advanced routing and security services.
J4350 and J6350 Services Router Getting Started Guide J4350 Services Router Overview The J4350 Services Router is designed primarily for regional or branch offices. It has a chassis that is 2 U (rack units) in size with a nonredundant AC or DC power supply, and a Universal Serial Bus (USB) port for external storage. J4350 routers ordered with the optional Crypto Accelerator card come standard with 1 GB of memory, while those ordered without the Crypto Accelerator card come standard with 256 MB of memory.
Overview of J4350 and J6350 Services Routers Serial Bus (USB) ports for external storage. The J6350 Services Router is a higher-performance system than the J4350 Services Router. J6350 routers come standard with 1 GB of memory and can contain between 256 MB to 2 GB of memory. For instructions on adding memory, see “Removing and Installing DRAM Modules” on page 155.
J4350 and J6350 Services Router Getting Started Guide Table 5: Summary of J-series Features and License Requirements Feature Category J-series Feature Internet Protocols IPv4 Separate License IPv6 routing and forwarding Routing and Multicast Open Shortest Path First (OSPF) Border Gateway Protocol (BGP) Routing Information Protocol version 1 (RIPv1) and RIPv2 Static routes Intermediate System-to-Intermediate System (IS-IS) Connectionless Network Services (CLNS): End system-to-Intermediate system (ES-
Overview of J4350 and J6350 Services Routers Table 5: Summary of J-series Features and License Requirements (continued) Feature Category J-series Feature Encapsulation Ethernet: Separate License Media access control (MAC) encapsulation 802.
J4350 and J6350 Services Router Getting Started Guide Table 5: Summary of J-series Features and License Requirements (continued) Feature Category J-series Feature High Availability Virtual Router Redundancy Protocol (VRRP) Separate License Graceful restart according to IETF standards Redundant interfaces System Management JUNOScope network manager J-Web browser interface—for Services Router configuration and management JUNOScript XML application programming interface (API) JUNOS command-line interfac
Chapter 2 System Overview The J4350 and J6350 Services Routers have chassis that are similar but with important differences. J4350 routers have nonredundant power supplies, six slots, including two enhanced (high-speed) slots, and an optional Crypto Accelerator Module. J6350 routers have redundant power supplies, six slots, including four enhanced (high-speed) slots, and a standard Crypto Accelerator Module. All J-series routers run the JUNOS Internet software.
J4350 and J6350 Services Router Getting Started Guide In addition to the features described in subsequent sections, the chassis includes the following features: One pair of metal brackets can be mounted at the front or center of the chassis. Use the brackets for mounting the chassis in a rack or cabinet. Two protective earthing terminals, PEM nuts at the rear of the chassis. One electrostatic discharge (ESD) point, a banana plug receptacle at the front of the chassis.
System Overview g003821 Figure 2: Rear of J4350 AC-Powered Chassis Protective earthing terminal Power supply fan exhaust AC power appliance inlet AC power switch NOTE: The J4350 AC-powered chassis has a power switch and does not include a power supply LED (unlike the J6350 AC-powered chassis).
J4350 and J6350 Services Router Getting Started Guide g003822 Figure 4: Rear of J4350 DC-Powered Chassis Protective earthing terminal DC terminal block Power supply LED Power supply fan exhaust g003802 Figure 5: Rear of DC-Powered J6350 Chassis Protective earthing terminal 12 Power supply ejector DC terminal block J4350 and J6350 Services Router Hardware Features Power supply LED Power supply fan exhaust
System Overview Figure 6: J4350 and J6350 Hardware Components Rear Power supply Crypto Accelerator Module Compact flash drive Fans (3) DRAM g003839 Midplane Physical Interface Module (PIM) Front Table 6 summarizes the physical specifications for the router chassis.
J4350 and J6350 Services Router Getting Started Guide Table 6: J4350 and J6350 Physical Specifications Description Chassis dimensions Value 3.44 in. (8.74 cm) high 17.44 in. (44.3 cm) wide—19.44 in. (48.38 cm) wide with mounting brackets attached 21.13 in. (53.67 cm) deep—plus 0.5 in. (1.27 cm) of hardware that protrudes from the chassis front Router weight J4350 Services Router: Minimum (no PIMs): 23 lb (10.4 kg) Maximum (six PIMs): 25.3 lb (11.
System Overview To view the amount of DRAM installed on your router, issue the show chassis routing-engine command. EPROM—Stores the serial number of the Routing Engine. To view the serial number of the Routing Engine, issue either the show chassis routing-engine command or the show chassis hardware command. Crypto Accelerator Module—Processor card that enhances performance of cryptographic algorithms used in IP security (IPSec) services.
J4350 and J6350 Services Router Getting Started Guide Figure 7: Front of J4350 and J6350 Chassis STATUS HA LED PORT 0 Power button PORT 1 STATUS LAN ports STATUS PORT 0 Console Auxiliary USB ports port port PORT 1 STATUS ESD point g003804 ALARM LED STATUS RESET CONFIG Physical Interface Modules (PIMs) button LED SERIAL SERIAL POWER LED The components of the front panel, from left to right, are described in the following sections: Physical Interface Modules (PIMs) on page 16 Power Button
System Overview Each Services Router has six front panel slots for field-replaceable PIMs. These slots are numbered from top to bottom and from left to right as shown in the slot number diagram on the front panel, shown in Figure 8. g003823 Figure 8: Slot Number Diagram on Front Panel Gigabit Ethernet and 4-port Fast Ethernet ePIMs can be installed in high-speed slots only. High-speed slots are indicated by a black triangle containing an E in the front panel slot number diagram.
J4350 and J6350 Services Router Getting Started Guide STATUS LED When the system is powered on, the STATUS LED changes from off to blinking green. Startup takes approximately 90 seconds to complete. If you want to turn the system off and on again, we recommend waiting a few seconds between shutting it down and powering it back up. Table 8 describes the STATUS LED. Table 8: Status LED Color State Description Green Blinking Router is starting up or performing diagnostics.
System Overview HA LED The HA (high availability) LED is for future use. The LED lights when the router starts, but otherwise remains unlit. RESET CONFIG Button Use the RESET CONFIG button to return the router to either the rescue configuration or the factory default configuration. The button is recessed to prevent it from being pressed accidentally.
J4350 and J6350 Services Router Getting Started Guide Table 10: Gigabit Ethernet Port LEDs (continued) Function Color State Description TX/RX Green Blinking Port is transmitting or receiving data. Unlit Off Port might be online, but it is not receiving data. Console Port You can use the console port to connect to the Routing Engine through an RJ-45 serial cable. From the console port, you can use the CLI to configure the router.
System Overview J4350 Power System The J4350 Services Router uses either AC or DC power. The autosensing power supply (see Figure 2 or Figure 4) distributes the different output voltages to the router components according to their voltage requirements. The power supply is fixed in the chassis, and is not field-replaceable. The AC power supply has a single AC appliance inlet that requires a dedicated AC power feed.
J4350 and J6350 Services Router Getting Started Guide router or disrupting the routing functions. To avoid electrical injury, carefully follow the instructions in “Replacing Power System Components” on page 158. NOTE: You cannot mix DC and AC power supplies in the same chassis. WARNING: DC-powered Services Routers are intended for installation only in a restricted access location. Cooling System The cooling system includes three fans at the rear of the chassis.
System Overview Figure 9: Airflow Through the J4350 and J6350 Chassis g003840 Rear Front Software Overview Each J-series Services Router runs the JUNOS Internet software on its general-purpose processors. Designed for the large production networks typically supported by Internet service providers (ISPs), the JUNOS software includes processes for Internet Protocol (IP) routing and for managing interfaces, networks, and the router chassis. The JUNOS Internet software runs on the Routing Engine.
J4350 and J6350 Services Router Getting Started Guide Routing Engine and Packet Forwarding Engine on page 24 Kernel and Microkernel on page 24 JUNOS Software Processes on page 24 User Interfaces on page 25 Routing Engine and Packet Forwarding Engine A Services Router has two primary software processing components: Routing Engine—Creates and maintains the routing tables that determine how packets are routed through the network.
System Overview Table 12: JUNOS Software Processes Process Name Description Management process mgd Manages the Services Router system as follows: Provides communication between the other processes and an interface to the configuration database Populates the configuration database with configuration information and retrieves the information when queried by other processes to ensure that the system operates as configured Interacts with the other processes when commands are issued through one of the user
J4350 and J6350 Services Router Getting Started Guide configure the router. The J-Web interface also provides tools for monitoring, managing, and diagnosing router operation. Command-line interface (CLI)—Grants access to the complete JUNOS command and configuration hierarchies, to monitor the router, diagnose problems, and configure it completely. For more information, see “Services Router User Interface Overview” on page 49.
Chapter 3 Physical Interface Modules Overview A Physical Interface Module (PIM) is a network interface card that is installed on a J-series Services Router, to provide physical connections to a LAN or a WAN. The PIM receives incoming packets from the network and transmits outgoing packets to the network. Each PIM is equipped with a dedicated network processor that forwards incoming data packets to the Routing Engine, and receives outgoing data packets from the Routing Engine.
J4350 and J6350 Services Router Getting Started Guide Table 13: PIM Terms (continued) Term Definition ADSL 2/2+ Annex B ITU-T Standard G.992.1 that defines how ADSL works over Integrated Services Digital Network (ISDN) lines. bandwidth on demand ISDN cost-control feature defining the bandwidth threshold that must be reached on all links before a Services Router initiates additional ISDN data connections to provide more bandwidth.
Physical Interface Modules Overview Table 13: PIM Terms (continued) Term Definition dial-on-demand-routing (DDR) backup Feature that provides a J-series Services Router with full-time connectivity across an ISDN line. When routes on a primary serial T1, E1, T3, E3, Fast Ethernet, or PPPoE interface are lost, an ISDN dialer interface establishes a backup connection. To save connection time costs, the Services Router drops the ISDN connection after a configured period of inactivity.
J4350 and J6350 Services Router Getting Started Guide Dual-Port Serial PIM on page 34 Dual-Port T1 or E1 PIM on page 35 Dual-Port Channelized T1 or E1 PIM on page 36 T3 or E3 PIM on page 38 Dual-Port Fast Ethernet PIM on page 40 4-Port Fast Ethernet ePIM on page 41 4-Port ISDN BRI PIMs on page 42 ADSL PIM on page 44 G.
Physical Interface Modules Overview Table 14: Field-Replaceable PIM Summary (continued) PIM Software Release for This PIM in J4350 or J6350 Slot and Port Numbering Sample Interface Name (type-pim/0/port) Dual-Port T1 or E1 JUNOS 8.0 and later Slots—1 through 6 t1-0/0/1 Ports—0 and 1 or e1-0/0/1 Dual-Port Channelized T1 or Channelized E1 T3 or E3 JUNOS 8.1 and later JUNOS 8.
J4350 and J6350 Services Router Getting Started Guide The Gigabit Ethernet ePIM provides the following key features: Full-duplex and half-duplex modes (built-in and Copper Gigabit Ethernet ePIMS only) Autonegotiation through medium-dependent interface (MDI) and MDI crossover (MDI–X) support Gigabit Ethernet ePIMs do not support SNMP. You can install Gigabit Ethernet ePIMs in any high-speed slot as follows: J4350—Install up to two Gigabit Ethernet ePIMs in slots 3 and 6.
Physical Interface Modules Overview LINK TX/RX 0 FP g003852 Figure 11: SFP Gigabit Ethernet ePIM GB S The SFP Gigabit Ethernet ePIM, shown in Figure 11, uses small form-factor pluggable transceivers (SFPs) that allow different interfaces to be used on the ePIM. The ePIM supports 1000Base-LX, 1000Base–SX, and 1000Base-TX SFPs only; it does not support 1000Base-LH SFPs. The SFP Gigabit Ethernet ePIM cannot be manually configured. It is set at 1000 Mbps and full duplex.
J4350 and J6350 Services Router Getting Started Guide Dual-Port Serial PIM The Dual-Port Serial PIM (Figure 12) provides a physical connection to serial network media types through two serial interface ports.
Physical Interface Modules Overview Table 16: Status LEDs for Serial Ports (continued) Color State Description Red On steadily Active with a local alarm. The router has detected a failure. Unlit Off Offline. Dual-Port T1 or E1 PIM The Dual-Port T1 PIM (Figure 13) and Dual-Port E1 PIM (Figure 14) provide a physical connection to T1 or E1 network media types. Each PIM has two physical T1 or E1 ports with an integrated channel service unit (CSU) or data service unit (DSU).
J4350 and J6350 Services Router Getting Started Guide G.703, G.704, and G.706 E1 standards compliance Independent internal and external clocking system Loopback, bit error rate test (BERT), T1 facilities data link (FDL), and long buildout diagnostics For pinouts of cable connectors for T1 and E1 PIMs, see “E1 and T1 RJ-48 Cable Pinouts” on page 196. For alarms, see the configuring and monitoring alarms information in the J-series Services Router Administration Guide.
Physical Interface Modules Overview PORT PORT 0 1 g002377 Figure 15: Channelized T1/E1 PIM S STATU S STATU The Dual-Port Channelized T1 or E1 PIM provides the following key features: Onboard network processor Two-port channelization Interfaces that are software configurable as T1 or E1 Clear-channel, fractional, and channelized operation Lower latency due to the addition of a Freescale processor Maximum MTU value of 4500 bytes (for channelized T1 or E1 interface) NOTE: For a clear-channel T1 or E1 i
J4350 and J6350 Services Router Getting Started Guide Channelized T1 and E1 LEDs indicate PIM and port status. Table 18 describes the meaning of the LED states. Table 18: LEDs for Channelized T1 and E1 PIMs Label Color State Description ONLINE Green On steadily PIM is online and operational. Unlit Off PIM is not online. STATUS Green On steadily Port is online with no alarms or failures, and the physical layer is active. Red Online Port is active with a local alarm.
Physical Interface Modules Overview g002334 Figure 17: E3 PIM E3 RX TX STATU S The T3 and E3 PIMs provide the following key features: Onboard network processor Integrated DSU—Eliminates the need for a separate external device Subrate and scrambling options with support for major DSU vendors Independent internal and external clocking system Loopback (payload–supported only on T3 PIM, local, and remote), bit error rate test (BERT), and T3 far-end alarm and control (FEAC) diagnostics For pinouts of cabl
J4350 and J6350 Services Router Getting Started Guide Table 19: Status LEDs for T3 and E3 Ports (continued) Color State Description Yellow On steadily Loopback mode. T3 (DS3)—Remote endpoint is in red alarm failure. E3—Remote defect indication (RDI). Unlit Off Offline. Dual-Port Fast Ethernet PIM The Dual-Port 10/100-Mbps Fast Ethernet PIM (Figure 18) has two physical Fast Ethernet ports.
Physical Interface Modules Overview Fast Ethernet LEDs indicate link status, port speed, and activity. Table 20 describes the meaning of the LEDs. Table 20: LEDs for Dual-Port Fast Ethernet PIM Label Color State Description LINK/SPEED Green (100 Mbps) On steadily Online and link is active. Red Disconnected Link is unavailable. Green Blinking Online with network traffic. Green On steadily Online without traffic.
J4350 and J6350 Services Router Getting Started Guide The 4-Port Fast Ethernet ePIM provides the following key features: Full-duplex and half-duplex modes. Autonegotiation through medium-dependent interface (MDI) and MDI crossover (MDI–X) support. For pinouts of cable connectors for Fast Ethernet ePIMs, see “RJ-45 Connector Pinout for Fast Ethernet Ports” on page 194. For alarms, see the configuring and monitoring alarms information in the J-series Services Router Administration Guide.
Physical Interface Modules Overview BRI-ST STATUS STATUS E ONLIN PORT PORT STATUS PORT 2 STATUS PORT 2 STATUS PORT 3 STATUS PORT 3 g002335 Figure 20: ISDN BRI S/T PIM 1 0 BRI-U STATUS STATUS E ONLIN PORT PORT g002336 Figure 21: ISDN BRI U PIM 1 0 ISDN BRI PIMs provide the following key features: Onboard network processor Bandwidth on demand Dial backup Dial-on-demand routing backup (floating static and dialer watch) For pinouts of cable connectors for ISDN PIMs, see “ISDN RJ-45 C
J4350 and J6350 Services Router Getting Started Guide Table 22: LEDs for ISDN BRI S/T and U PIMs Label Color State Description ONLINE Green Blinking Call setup is successful on either the B1 or B2 channel. Green On steadily ISDN Layer 2 is active. Amber On steadily ISDN Layer 1 is active. ISDN Layer 2 is unavailable. Red Disconnected BRI interface port is not connected. ISDN Layer 1 is unavailable. STATUS Unlit Off BRI interface is offline.
Physical Interface Modules Overview 0 PORT S ADSL-B STATU g002332 Figure 23: ADSL 2/2+ Annex B PIM E ONLIN The ADSL PIM provides the following key features: Onboard network processor ADSL, ADSL2, and ADSL2+ protocols on the same PIM “Dying gasp” notification Asynchronous Transfer Mode (ATM) Adaptation Layer 5 (AAL5) encapsulation For pinouts of cable connectors for ADSL PIMs, see “ADSL and G.SHDSL RJ-11 Connector Pinout” on page 199.
J4350 and J6350 Services Router Getting Started Guide G.SHDSL PIM The G.SHDSL PIM (Figure 24) provides symmetric high-speed digital subscriber line (SHDSL) physical interfaces to ATM network media types. The G.SHDSL PIM has two ports for ATM-over-SHDSL connections. G.SHDSL PORT 0 PORT 1 S STATU g002328 Figure 24: G.SHDSL PIM S STATU E ONLIN The G.
Physical Interface Modules Overview The G.SHDSL PIM has two LEDs to indicate the status of the PIM and its ports. Table 24 describes the meaning of the LED states. Table 24: LEDs for G.SHDSL PIMs Label Color State Description ONLINE Green On steadily Online with no alarms or failures. Red Disconnected Initialization of the PIM has failed. Unlit Off PIM is booting. Green On steadily Online with no alarms or failures. Red On steadily Active with a local alarm.
J4350 and J6350 Services Router Getting Started Guide 48 Field-Replaceable PIMs
Chapter 4 Services Router User Interface Overview You can use two user interfaces to monitor, configure, troubleshoot, and manage a Services Router—the J-Web interface and the JUNOS command-line interface (CLI).
J4350 and J6350 Services Router Getting Started Guide Router. For example, to display a summary of routing table entries, click Monitor in the task bar, then click Routing>Route Information in the side pane. The routes are displayed in the main pane. For more information about the J-Web interface, see “Using the J-Web Interface” on page 52. CLI Overview The CLI is a straightforward command interface in which you type commands on a line and press Enter to execute them.
Services Router User Interface Overview Table 25: Services Router Configuration Interfaces Interface Description Capabilities Recommendations J-Web Quick Configuration Web browser pages for setting up the Services Router quickly and easily without configuring each statement individually. Configure basic router services: Use for basic configuration. For example, use the Set Up Quick Configuration page to configure the Services Router for basic connectivity so you can manage it from the network.
J4350 and J6350 Services Router Getting Started Guide Table 25: Services Router Configuration Interfaces (continued) Interface Description Capabilities Recommendations J-Web configuration editor Web browser pages divided into panes in which you can do any of the following: Configure all router services: Use for complete configuration if you are not familiar with the JUNOS CLI or prefer a graphical interface.
Services Router User Interface Overview Starting the J-Web Interface on page 53 J-Web Layout on page 53 J-Web Sessions on page 58 Starting the J-Web Interface To start the J-Web interface: 1. Launch your HTTP-enabled or HTTPS-enabled Web browser. To use HTTPS, you must have installed a certificate on the Services Router and enabled HTTPS.
J4350 and J6350 Services Router Getting Started Guide Main pane—Location where you monitor, configure, diagnose, and manage the Services Router by entering information in text boxes, making selections, and clicking buttons. Side pane—Displays suboptions of the Monitor, Configuration, Diagnose, or Manage task currently displayed in the main pane. Click a suboption to access it in the main pane. Bottom pane—Displays copyright and trademark information.
Services Router User Interface Overview Figure 25: J-Web Layout Using the J-Web Interface 55
J4350 and J6350 Services Router Getting Started Guide Figure 26: J-Web Layout—Configuration Editor 56 Using the J-Web Interface
Services Router User Interface Overview Table 26: Summary of J-Web Elements J-Web Interface Element Description Top Pane Juniper Networks logo Link to http://www.juniper.net in a new browser window. hostname – model Hostname and model of the Services Router. Logged in as: username Username you used to log in to the Services Router. Help Link to context-sensitive help information. About Displays information about the J-Web interface, such as the version number.
J4350 and J6350 Services Router Getting Started Guide J-Web Sessions You establish a J-Web session with the Services Router through an HTTP-enabled or HTTPS-enabled Web browser. The HTTPS protocol, which uses 128-bit encryption, is available only in domestic versions of the JUNOS software. To use HTTPS, you must have installed a certificate on the Services Router and enabled HTTPS.
Services Router User Interface Overview Figure 27: CLI Command Hierarchy Example show isis ospf ....... ....... ....... brief exact route system ....... protocol table terse 1411 bgp To execute a command, you enter the full command name, starting at the top level of the hierarchy. For example, to display a brief view of the routes in the routing table, use the command show route brief.
J4350 and J6350 Services Router Getting Started Guide 3. Start the CLI. user# cli user@host> The presence of the angle bracket (>) prompt indicates the CLI has started. By default, the prompt is preceded by a string that contains your username and the hostname of the Services Router. To exit the CLI and return to the UNIX shell, enter the quit command. CLI Operational Mode The CLI has two modes: operational and configuration.
Services Router User Interface Overview To control the CLI environment, see “Configuring the CLI Environment” on page 65. To enter configuration mode, see “CLI Configuration Mode” on page 61. For information about the other CLI operational mode functions, see the J-series Services Router Administration Guide. CLI Configuration Mode To configure the Services Router, including system parameters, routing protocols, interfaces, network management, and user access, you must enter configuration mode.
J4350 and J6350 Services Router Getting Started Guide To configure the Services Router or to modify an existing configuration, you add statements to the configuration with the edit and set configuration mode commands. For more information about the CLI configuration editor and configuration mode, see the J-series Services Router Basic LAN and WAN Access Configuration Guide and the JUNOS software configuration guides.
Services Router User Interface Overview Table 27: CLI Editing Keystrokes (continued) Task Category Action Keyboard Sequence Display previous command lines. Scroll backward through the list of recently executed commands. Ctrl-p Scroll forward through the list of recently executed commands. Ctrl-n Search the CLI history in reverse order for lines matching the search string. Ctrl-r Search the CLI history by typing some text at the prompt, followed by the keyboard sequence.
J4350 and J6350 Services Router Getting Started Guide Type a question mark after entering the complete name of a command or command option.
Services Router User Interface Overview Table 28: help Commands CLI Command Description help apropos string Displays help based on a text string contained in a statement or command name. If the string contains spaces, enclose it in quotation marks. You also can specify a regular expression for the string, using standard UNIX-style regular expression syntax. In configuration mode, this command displays statement names and help text that match the string specified.
J4350 and J6350 Services Router Getting Started Guide idle-timeout prompt restart-on-upgrade screen-length screen-width terminal Set Set Set Set Set Set maximum idle time before login session ends CLI command prompt string whether CLI prompts to restart after software upgrade number of lines on screen number of characters on a line terminal type Table 29 shows how you can change the CLI environment features.
Services Router User Interface Overview Table 29: Configuring the CLI Environment (continued) Environment Feature CLI Command Default Setting Options Number of CLI characters displayed on a line set cli screen-width width Variable (depends on terminal type). To change the number of characters displayed on a line, replace width with a value between 0 and 100,000. Your terminal type. set cli terminal terminal-type unknown, or set by console.
J4350 and J6350 Services Router Getting Started Guide 68 Using the Command-Line Interface
Part 2 Installing a Services Router Preparing for Router Installation on page 71 Installing and Connecting a Services Router on page 81 Establishing Basic Connectivity on page 93 Configuring Secure Web Access on page 115 Configuring Autoinstallation on page 125 Installing and Managing J-series Licenses on page 131 Installing a Services Router 69
70 Installing a Services Router
Chapter 5 Preparing for Router Installation Before installing a J-series Services Router, make sure that your site has the proper operating environment and equipment. Use the checklist at the end of the chapter to help you prepare your site.
J4350 and J6350 Services Router Getting Started Guide Rack Requirements J4350 and J6350 Services Routers must be installed in a rack. Many types of racks are acceptable, including front-mount racks, four-post (telco) racks, and center-mount racks.
Preparing for Router Installation The J4350 and J6350 chassis height of 3.5 in. (8.7 cm) equals 2 U. Each U is a standard rack unit defined in Cabinets, Racks, Panels, and Associated Equipment (document number EIA-310-D) published by the Electronics Industry Association. Connection to Building Structure Always secure the rack to the structure of the building. If your geographical area is subject to earthquakes, bolt the rack to the floor. For maximum stability, also secure the rack to ceiling brackets.
J4350 and J6350 Services Router Getting Started Guide and that all local fire, safety, and electrical codes and ordinances be observed when you are installing and operating your equipment. Fire Suppression In the event of an electrical hazard or an electrical fire, first unplug the power cord. (For shutdown instructions, see “Powering a Services Router On and Off” on page 90.) Then, use a Type C fire extinguisher, which uses noncorrosive fire retardants, to extinguish the fire.
Preparing for Router Installation Site Electrical Wiring Guidelines on page 75 Router Power Requirements on page 76 AC Power, Connection, and Power Cord Specifications on page 76 DC Power, Connection, and Power Cable Specifications on page 77 Site Electrical Wiring Guidelines WARNING: DC-powered J4350 and J6350 Services Routers are intended for installation only in a restricted access location. When planning the electrical wiring at your site, consider the factors discussed in the following sections.
J4350 and J6350 Services Router Getting Started Guide Router Power Requirements Table 31 lists the AC and DC power system electrical specifications for J-series Services Routers.
Preparing for Router Installation Table 32: AC Power Cord Specifications (continued) Country Electrical Specifications Plug Standards Europe (except Italy and United Kingdom) 250 VAC, 10 A, 50 Hz CEE (7) VII Italy 250 VAC, 10 A, 50 Hz CEI 23–16/VII Japan 125 VAC, 12 A, 50 Hz or 60 Hz JIS 8303 North America 125 VAC, 10 A, 60 Hz NEMA 5-15 United Kingdom 250 VAC, 10 A, 50 Hz BS 1363A Australia China Europe Italy Japan North America UK g001892 Figure 28: AC Plug Types NOTE: Power cor
J4350 and J6350 Services Router Getting Started Guide CAUTION: There is no standard color coding for DC power cables. The color coding used by the external DC power source at your site determines the color coding for the leads on the power cables that attach to the terminal studs on each power supply. You must ensure that power connections maintain the proper polarity. The power source cables might be labeled (+) and (–) to indicate their polarity.
Preparing for Router Installation ISDN Provisioning You might need a network termination type 1 (NT1) device to connect your ISDN interface to the ISDN service. Contact your service provider for details on the following information: External NT1 device and ISDN cable If the two items are required, where to obtain the items List of NT1 vendors Site Preparation Checklist The checklist in Table 33 summarizes the tasks you need to perform when preparing a site for Services Router installation.
J4350 and J6350 Services Router Getting Started Guide 80 Site Preparation Checklist
Chapter 6 Installing and Connecting a Services Router Make the appropriate preparations and verify the J-series equipment before installing a J-series Services Router and connecting it to a power source and the network.
J4350 and J6350 Services Router Getting Started Guide cords or cords shipped with the router. (You must supply your own power cables if you have a DC-powered router.) NOTE: The AC power cord for the Services Router is intended for use with the router only and not for any other use. To connect network interfaces, have ready a length of cable used by the interface, as specified in “Network Cable Specifications and Connector Pinouts” on page 185.
Installing and Connecting a Services Router Installing a J4350 and J6350 Services Router WARNING: DC-powered Services Routers are intended for installation only in a restricted access location. You can center- or front-mount the J4350 and J6350 Services Routers in a rack. In general, a center-mount rack is preferable to a front-mount rack because the more even distribution of weight in the center-mount rack provides greater stability.
J4350 and J6350 Services Router Getting Started Guide 2. Attach a screw to each rack rail in the third hole down from where you want the top of the router to be positioned. Screw only part way in, leaving about ¼ in. (6 mm) distance between the screw head and the rail (see Figure 30). Figure 30: Attaching Center Screw to the Rack Rail 1RU (rack unit) measurement 29 3.
Installing and Connecting a Services Router 5. Install at least two mounting screws into each mounting bracket, in addition to the center screws from which the router hangs (see Figure 32). Use a number 2 Phillips screwdriver to tighten the screws. g003863 Figure 32: Completing the Installation Connecting Interface Cables to a Services Router You connect the interfaces installed in the Services Router to various network media.
J4350 and J6350 Services Router Getting Started Guide Chassis Grounding To meet safety and electromagnetic interference (EMI) requirements and to ensure proper operation, the Services Router must be adequately grounded before power is connected. In addition to the grounding pin on the AC power plug cord, a threaded insert (PEM nut), screw, and washer are provided on the rear of the chassis to connect the router to earth ground.
Installing and Connecting a Services Router For power cord requirements, see “AC Power, Connection, and Power Cord Specifications” on page 76 To connect AC power to the router: 1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strip to the ESD point on the chassis. For more information about ESD, see “Preventing Electrostatic Discharge Damage” on page 205. 2.
J4350 and J6350 Services Router Getting Started Guide g003825 Figure 33: Connecting AC Power to the J4350 or J6350 Services Router Washer Grounding lug Connecting DC Power CAUTION: If your J6350 Services Router includes an optional redundant DC power supply, connect each of the two power supplies to different input power sources. Failure to do so makes the router susceptible to total power failure if one of the power supplies fails. The router must be connected to earth ground during normal operation.
Installing and Connecting a Services Router c. With a Phillips screwdriver, remove the screws and washers from the PEM nuts at the grounding point on the rear of the chassis. d. Place the grounding lug at the other end of the cable over the grounding point, as shown in Figure 34. e. Secure the cable lug to the grounding point, first with the washers, then with the screws.
J4350 and J6350 Services Router Getting Started Guide h. 4. Replace the clear plastic cover over the terminal block. Verify that the power cables do not block access to router components or drape where people can trip on them. g003826 Figure 34: Connecting DC Power to the J4350 or J6350 Services Router DC Terminal block Washer Grounding lug Lug Screw with captive washer -48V RTN Powering a Services Router On and Off To power on a Services Router, press the power button.
Installing and Connecting a Services Router power button to power the router off, the router remains in standby mode and a small amount (5 V and 3.3 V) of standby voltage is still available in the chassis.
J4350 and J6350 Services Router Getting Started Guide 92 Powering a Services Router On and Off
Chapter 7 Establishing Basic Connectivity The JUNOS software is preinstalled on the Services Router. When the router is powered on, it is ready to be configured. If the router does not have a configuration from the factory or your service provider, you must configure the software to establish basic connectivity. If you are setting up a Services Router for the first time, you can use either J-Web Quick Configuration or a configuration editor to configure basic connectivity.
J4350 and J6350 Services Router Getting Started Guide Table 34: Basic Connectivity Terms Term Definition domain name Name that identifies the network or subnetwork of a router. Dynamic Host Configuration Protocol (DHCP) Protocol for assigning dynamic IP addresses to devices on a network. gateway Packets destined for IP addresses not identified in the routing table are sent to the default gateway. hostname Unique name that identifies a router on the network.
Establishing Basic Connectivity Router Identification The domain name defines the network or subnetwork that the Services Router belongs to. The hostname refers to the specific machine, while the domain name is shared among all the devices in a given network. Together the hostname and domain name identify the router in the network. Root Password The root user has complete privileges to configure the Services Router, and manage files in the router’s file system.
J4350 and J6350 Services Router Getting Started Guide For Common Criteria compliance, you must configure NTP to provide accurate timestamps for system log messages. For more information, see the Secure Configuration Guide for Common Criteria and JUNOS-FIPS. Network Settings A Domain Name System (DNS) server on the network maintains a database for resolving hostnames and IP addresses. Network devices can query the DNS server by hostnames rather than IP addresses.
Establishing Basic Connectivity If you use the J-Web Set Up Quick Configuration page, you can either set a loopback address of your choice or have the loopback address automatically set to 127.0.0.1 when you click Apply or OK to commit the configuration. Built–In Ethernet Interface Address The built-in Gigabit Ethernet interfaces, ge-0/0/0 through ge-0/0/3, on the front panel of the Services Router, are the interfaces through which you perform initial router setup.
J4350 and J6350 Services Router Getting Started Guide Telnet access to the root user is prohibited. You must use more secure methods, such as SSH, to log in as root. If you are using a JUNOScript server to configure and monitor routers, you can activate clear-text access on the router to allow unencrypted text to be sent directly over a TCP connection without using any additional protocol (such as SSH, SSL, or Telnet). Information sent in clear text is not encrypted and therefore can be intercepted.
Establishing Basic Connectivity IP address to be used for the loopback interface IP address of the built-in Ethernet interface that you will use for management purposes. The examples in this guide use the ge-0/0/0 interface.
J4350 and J6350 Services Router Getting Started Guide To connect to the J-Web interface through port 0 on the router (see Figure 35): 1. On the management device, such as a PC or laptop, you use to access the J-Web interface, verify that the address of the port that you connect to the router is set to one of the following: An Ethernet address on the 192.168.1/24 subnetwork other than 192.168.1.1 An Ethernet address from a DHCP server 2. Turn off the power to the management device. 3.
Establishing Basic Connectivity Figure 35: Connecting to the Gigabit Ethernet Port on the Services Router Ethernet port NUMBER SLOT 4 0 1 PORT 0 PORT W PO AL ER AR M AT ST STATUS STATUS 1 E AUX CONSOL 1 2 3 E E 5 6 E E USB US HA POWER RESET CONFIG 10/100 /1000 g003809 Ethernet port RJ-45 cable Connecting to the CLI Locally If you plan to use the CLI to configure the router, you must connect through the console port, as shown in Figure 36.
J4350 and J6350 Services Router Getting Started Guide 6. Turn on the power to the management device. 7. Start your asynchronous terminal emulation application (such as Microsoft Windows Hyperterminal) and select the appropriate COM port to use (for example, COM1). 8. Configure the port settings as follows: Bits per second: 9600 Data bits: 8 Parity: None Stop bits: 1 Flow control: None 9. Power on the router by pressing the power button on the front panel.
Establishing Basic Connectivity Connecting to the CLI Remotely You can connect to the CLI from a remote location through two dial-up modems: a modem that is connected to the console port on the Services Router and a second modem connected to a remote management device. The modem connection allows you to remotely perform the same console operations you can perform locally.
J4350 and J6350 Services Router Getting Started Guide 6. To configure the modem to answer a call on the first ring, enter ATS0=1. 7. To configure the modem to accept modem control Data Terminal Ready (DTR) signals, enter AT&D1. 8. To disable flow control, enter AT&K0. 9. To save modem settings, enter AT&W. Connecting the Modem to the Console Port NOTE: Most modems have an RS-232 DB-25 connector.
Establishing Basic Connectivity 3. Select the COM port to which the modem is connected (for example, COM1). 4. Configure the port settings as follows: Bits per second: 9600 Data bits: 8 Parity: None Stop bits: 1 Flow control: None 5. In the HyperTerminal window, enter AT. An OK response verifies that the modem communicates successfully with the COM port on the PC or laptop. 6. To dial the modem that is connected to the console port on the router, enter ATDT remote-modem-number .
J4350 and J6350 Services Router Getting Started Guide To apply the configuration and return to the Quick Configuration page, click OK. To cancel your entries and return to the Quick Configuration page, click Cancel. NOTE: After initial configuration is complete, the Services Router stops functioning as a DHCP server. If you change the IP address of ge-0/0/0 and have the management device configured to use DHCP, you lose your DHCP lease and your connection to the router through the J-Web interface.
Establishing Basic Connectivity Table 35: Set Up Quick Configuration Summary (continued) Field Function Your Action Current System Time Synchronizes the system time with the NTP server, or manually set the system time and date. To immediately set the time using the NTP server, click Set Time via NTP. The router sends a request to the NTP server and synchronizes the system time.
J4350 and J6350 Services Router Getting Started Guide Table 35: Set Up Quick Configuration Summary (continued) Field Function Your Action Allow JUNOScript over Clear-Text Access Allows JUNOScript to access the router using a protocol for sending unencrypted text over a TCP connection. To enable JUNOScript access over clear text, select the check box. Allow SSH Access Allows remote access to the router using SSH. To enable SSH access, select the check box.
Establishing Basic Connectivity 1. Navigate to the top of the configuration hierarchy in either the J-Web or CLI configuration editor. 2. To configure basic settings, perform the configuration tasks described in Table 37. 3. If you are using the J-Web interface, click Commit to view a summary of your changes, then click OK to commit the configuration. If you are using the CLI, commit the configuration by entering the commit command. 4.
J4350 and J6350 Services Router Getting Started Guide Table 37: Configuring Basic Settings (continued) Task J-Web Configuration Editor CLI Configuration Editor Define root authentication for access to the router. 1. Set the root password. For example: NOTE: For readability, the entire key is not shown. Define the time zone the router is located in. Define the NTP server that NTP requests can be sent to. In the Nested configuration section, next to Root authentication, click Configure or Edit. 2.
Establishing Basic Connectivity Table 37: Configuring Basic Settings (continued) Task J-Web Configuration Editor CLI Configuration Editor Add each domain that the router belongs to. 1. Next to Domain search, click Add New Entry. Set the domains to be searched. For example: 2. In the Value box, type the name of the domain in which the router is located—for example, lab.router.net. set domain-search lab.router.
J4350 and J6350 Services Router Getting Started Guide Table 37: Configuring Basic Settings (continued) Task J-Web Configuration Editor CLI Configuration Editor Define the IP address for lo0.0. 1. In the configuration editor hierarchy, next to Interfaces, click Configure or Edit. 1. 2. In the Interface table, locate the lo0 row and click Unit. From the [edit] hierarchy level, enter edit interfaces Define the IP address for ge-0/0/0. 3.
Establishing Basic Connectivity Verifying Basic Connectivity To verify that the Services Router has the settings you configured, perform the following task. Displaying Basic Connectivity Configurations Purpose Action Sample Output Verify the configuration of basic connectivity. Because the basic connectivity settings appear in different places in the configuration hierarchy, displaying the entire configuration at once makes viewing the settings easier.
J4350 and J6350 Services Router Getting Started Guide What It Means 114 The output shows the configuration of basic connectivity. Verify that the values displayed are correct for your Services Router. For more information about the format of a configuration file, see the J-series Services Router Basic LAN and WAN Access Configuration Guide.
Chapter 8 Configuring Secure Web Access You can manage a Services Router remotely through the J-Web interface. To communicate with the Services Router, the J-Web interface uses Hypertext Transfer Protocol (HTTP). HTTP allows easy Web access but no encryption. The data that is transmitted between the Web browser and the router by means of HTTP is vulnerable to interception and attack. To enable secure Web access, a Services Router supports Hypertext Transfer Protocol over Secure Sockets Layer (HTTPS).
J4350 and J6350 Services Router Getting Started Guide Table 38: Secure Web Access Terms (continued) Term Definition Hypertext Transfer Protocol over Secure Sockets Layer (HTTPS) Protocol similar to HTTP with an added encryption layer that encrypts and decrypts user page requests and pages that are returned by a Web server. HTTPS is used for secure communication, such as payment transactions. Privacy-Enhanced Mail (PEM) Technique for securely exchanging electronic mail over a public medium.
Configuring Secure Web Access Before You Begin Before you begin initial configuration, complete the following tasks: Establish basic connectivity. See “Establishing Basic Connectivity” on page 93. Obtain an SSL certificate from a trusted signing authority. See “Generating SSL Certificates” on page 117. Generating SSL Certificates To enable secure Web access, you must first generate a digital SSL certificate, and then enable HTTPS access on the Services Router. To generate an SSL certificate: 1.
J4350 and J6350 Services Router Getting Started Guide Figure 37: Quick Configuration Secure Access Page To configure Web access settings in the J-Web interface: 1. 118 Generate an SSL certificate. An SSL certificate is required for enabling HTTPS or SSL JUNOScript access. Skip this step if you are enabling HTTP access. For instructions about generating SSL certificates, see “Generating SSL Certificates” on page 117.
Configuring Secure Web Access 2. In the J-Web user interface, select Configuration>Quick Configuration>Secure Access. 3. Enter information into the Secure Access Quick Configuration page, as described in Table 39. 4. Click one of the following buttons: To apply the configuration and stay on the Quick Configuration page, click Apply. To apply the configuration and return to the Quick Configuration page, click OK. To cancel your entries and return to the Quick Configuration page, click Cancel. 5.
J4350 and J6350 Services Router Getting Started Guide Table 39: Secure Access Quick Configuration Summary Field Function Your Action Displays digital certificates required for SSL access to the Services Router. To add a certificate: Certificates Certificates 1. Click Add. Opens the Add a Local Certificate page. 2. Type a name in the Certificate Name box—for example, new. 3. Paste the generated certificate and RSA private key in the Certificate box.
Configuring Secure Web Access Table 39: Secure Access Quick Configuration Summary (continued) Field Function Your Action Allows you to specify interfaces on which you want to enable HTTPS access. Select and deselect interfaces by clicking the direction arrows: Certificates HTTPS-Enabled Interfaces To enable HTTPS access on an interface, add the interface to the HTTPS Interfaces list. To disable HTTPS access on an interface, add the interface to the Logical Interfaces list.
J4350 and J6350 Services Router Getting Started Guide Table 40: Configuring a Secure Web Access (continued) Task J-Web Configuration Editor CLI Configuration Editor Import the SSL certificate that you have generated—for example, new. 1. Next to Certificates, click Configure. Enter 2. Next to Local, click Add new entry. set certificates local new load-key-file path 3. In the Name box, type a name for the certificate to be imported—for example, new.
Configuring Secure Web Access Sample Output [edit] user@R0# show security certificates { local { new { "-----BEGIN RSA PRIVATE KEY-----\nMIICXQIBAAKBgQC/C5UI4frNqbi qPwbTiOkJvqoDw2YgYse0Z5zzVJyErgSg954T\nEuHM67Ck8hAOrCnb0YO+SY Y5rCXLf4+2s8k9EypLtYRw/Ts66DZoXI4viqE7HSsK\n5sQw/UDBIw7/MJ+OpA ... KYiFf4CbBBbjlMQJ0HFudW6ISVBslONkzX+FT\ni95ddka6iIRnArEb4VFCRh+ e1QBdp1UjziYf7NuzDx4Z\n -----END RSA PRIVATE KEY-----\n-----BEGIN CERTIFICATE----- \nMIIDjDCCAvWgAwIBAgIBADANBgkqhkiG9w0BAQQ ...
J4350 and J6350 Services Router Getting Started Guide 124 Verifying Secure Web Access
Chapter 9 Configuring Autoinstallation If you are setting up many J-series Services Routers, autoinstallation can help automate the configuration process. You can use either the J-Web configuration editor or CLI configuration editor to configure autoinstallation. The J-Web interface does not include Quick Configuration pages for autoinstallation.
J4350 and J6350 Services Router Getting Started Guide Autoinstallation Overview Autoinstallation provides automatic configuration when a new Services Router is powered on without a configuration file or for a Services Router configured for autoinstallation. The autoinstallation process begins anytime a Services Router is powered on and a valid configuration file is not found in the nonvolatile RAM (NVRAM).
Configuring Autoinstallation specified, a DNS server must be available to translate the name of the TFTP server into an IP address. If the TFTP server is not on the same LAN segment as the new Services Router, or if a specific router is required by the network, then the IP address of an intermediary router must be specified. This address is used as the location to receive TFTP requests for autoinstallation.
J4350 and J6350 Services Router Getting Started Guide Create a configuration file and place it on a TFTP server on the network. A configuration file can be either of the following: A host-specific file with the name hostname.conf where hostname is the name of the Services Router. A default configuration file with the minimum configuration necessary to Telnet into the new Services Router for further configuration.
Configuring Autoinstallation 4. To check the configuration, see “Verifying Autoinstallation” on page 129. Table 42: Configuring Autoinstallation Task J-Web Configuration Editor CLI Configuration Editor Navigate to the System level in the configuration hierarchy. 1. From the [edit] hierarchy level, enter 2. In the J-Web interface, select Configuration>View and Edit> Edit Configuration. Next to System, click Configure or Edit. Enable autoinstallation.
J4350 and J6350 Services Router Getting Started Guide Action Sample Output From the CLI, enter the show system autoinstallation status command. user@host> show system autoinstallation status Autoinstallation status: Master state: Active Last committed file: None Configuration server of last committed file: 10.25.100.1 Interface: Name: ge-0/0/0 State: Configuration Acquisition Acquired: Address: 192.168.124.75 Hostname: host-ge-000 Hostname source: DNS Configuration filename: router-ge-000.
Chapter 10 Installing and Managing J-series Licenses To enable some JUNOS software features on a J-series Services Router, you must purchase, install, and manage separate software licenses. The presence on the router of the appropriate software license keys (passwords) determines the features you can configure and use. For information about how to purchase J-series software licenses, contact your Juniper Networks sales representative.
J4350 and J6350 Services Router Getting Started Guide Table 43: J-series Services Router Software Feature Licenses Licensed Software Feature License Name IBM Networking Data link switching (DLSw) on all J-series Services Routers J-series Services Router Software License for Data Link Switching (DLSw) Support Traffic Analysis J-Flow traffic analysis—all configuration statements within the [edit forwarding-options sampling] and [edit forwarding-options accounting] hierarchies.
Installing and Managing J-series Licenses Managing J-series Licenses with the J-Web Interface To manage licenses with the J-Web interface, you perform the following tasks: Adding New Licenses with the J-Web Interface on page 134 Deleting Licenses with the J-Web Interface on page 135 Displaying License Keys with the J-Web Interface on page 135 Downloading Licenses with the J-Web Interface on page 135 Figure 38 shows the J-Web Licenses page.
J4350 and J6350 Services Router Getting Started Guide The Licenses page displays a summary of licensed features that are configured on the Services Router and a list of the licenses that are installed on the router. The information on the license management page is summarized in Table 44. Table 44: Summary of License Management Fields Field Name Definition Feature Summary Feature Name of the licensed feature: J-series licenses listed in Table 43.
Installing and Managing J-series Licenses In the License File URL box, type the full URL to the destination file containing the license key to be added. In the License Key Text box, paste the license key text, in plain-text format, for the license to be added. 4. Click OK to add the license key. 5. Go on to “Verifying J-series License Management” on page 137. Deleting Licenses with the J-Web Interface To delete one or more license keys from a Services Router with the J-Web license manager: 1.
J4350 and J6350 Services Router Getting Started Guide 3. Select Save it to disk and specify the file to which the license keys are to be written. 4. Go on to “Verifying J-series License Management” on page 137. Managing J-series Licenses with the CLI To manage the J-series licenses with the CLI, perform the following tasks.
Installing and Managing J-series Licenses 3. Go on to “Verifying J-series License Management” on page 137. Saving License Keys with the CLI To save the licenses installed on the Services Router to a file with the CLI: 1. Enter operational mode in the CLI. 2. To save the installed license keys to a file or URL, enter the following command: request system license save filename | url For example, the following command saves the installed license keys to a file named license.
J4350 and J6350 Services Router Getting Started Guide License identifier: G03000002224 State: valid License version: 2 Valid for device: JN001875AB Features: dlsw - Data-Link Switching (DLSw) protocol License identifier: G03000002225 State: valid License version: 2 Valid for device: JN001875AB Features: j-flow - J-FLOW traffic analysis (CFLOW reporting) What It Means The output shows a list of the license usage and a list of the licenses installed on the Services Router.
Installing and Managing J-series Licenses The number of used licenses matches the number of configured features. If a licensed feature is configured, the feature is considered used. The sample output shows that the DLSw and BGP route reflection features are configured. A license is installed on the Services Router for each configured feature. For every feature configured that does not have a license, one license is needed.
J4350 and J6350 Services Router Getting Started Guide 140 Verifying J-series License Management
Part 3 Maintaining Services Router Hardware Replacing and Troubleshooting Hardware Components on page 143 Contacting Customer Support and Returning Hardware on page 175 Maintaining Services Router Hardware 141
142 Maintaining Services Router Hardware
Chapter 11 Replacing and Troubleshooting Hardware Components Because many of the Services Router’s hardware components are field-replaceable units (FRUs), you can remove and replace them yourself. When you need to replace a router component, contact your customer support or sales representative to order the field-replaceable unit (FRU) that contains the component. For instructions, see “Contacting Customer Support and Returning Hardware” on page 175.
J4350 and J6350 Services Router Getting Started Guide Tools and Parts Required To replace hardware components, you need the tools and parts listed in Table 45. Table 45: Tools and Parts Required Tool or Part Components Electrostatic bag or antistatic mat All Electrostatic discharge (ESD) grounding wrist strap All Flat-blade screwdriver, approximately 1/4 in.
Replacing and Troubleshooting Hardware Components Removing a PIM The PIMs are installed in the front of the Services Router. A PIM weighs less than 1 lb (0.5 kg). CAUTION: Do not hot-swap PIMs. Failure to power off the router before removing or installing a PIM might result in damage to the hardware. To remove a PIM (see Figure 39): 1. Place an electrostatic bag or antistatic mat on a flat, stable surface to receive the PIM. 2.
J4350 and J6350 Services Router Getting Started Guide Figure 39: Removing a PIM RM ALA S TU STA HA POWER RESET G CONFI 0 10/100/100 SERIAL ER W PO S STATU NUMBER SLOT 4 E 1 5 E E 2 6 E 3 USB PORT 1 S STATU 0 PORT g003817 0 1 LE AUX CONSO Captive screws Installing a PIM CAUTION: Do not hot-swap PIMs. Failure to power off the router before removing or installing a PIM might result in damage to the hardware. To install a PIM (see Figure 40): 1.
Replacing and Troubleshooting Hardware Components Secure each cable so that it is not supporting its own weight as it hangs to the floor. Place excess cable out of the way in a neatly coiled loop. Use fasteners to maintain the shape of cable loops. 7. Press and release the power button to power on the router. Verify that the POWER LED lights steadily after you press the power button. 8. Verify that the PIM LEDs light steadily green to confirm that the PIM and its ports are online and operational.
J4350 and J6350 Services Router Getting Started Guide Removing a PIM Cable To remove a PIM cable: 1.
Replacing and Troubleshooting Hardware Components For more information about the command, see the JUNOS System Basics and Services Command Reference. 7. Verify that the PIM status LED shines steadily green to confirm that the PIM is online. You can also verify correct PIM functioning by issuing the show chassis fpc pic-status command described in the JUNOS System Basics and Services Command Reference.
J4350 and J6350 Services Router Getting Started Guide Figure 41: Location of Compact Flash Disk g003842 Compact flash drive On some Services Routers, the compact flash is in a horizontal position, while on others it is in a vertical position. Figure 42 shows the alternative horizontal orientation of the compact flash.
Replacing and Troubleshooting Hardware Components Figure 42: Alternative Horizontal Orientation of Compact Flash Disk g003838 Compact flash drive To replace the compact flash disk: 1. Place an electrostatic bag or antistatic mat on a flat, stable surface. 2. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to the ESD point on the chassis, or to an outside ESD point if the router is disconnected from earth ground.
J4350 and J6350 Services Router Getting Started Guide WARNING: If the fans are still rotating, wait until they stop before proceeding with the next step, especially if your compact flash is in the horizontal position (flat against the bottom of the chassis). 7. Slide the compact flash disk out of its slot, as shown in Figure 43. g003835 Figure 43: Removing the Compact Flash Disk 152 8. Place the compact flash disk on the antistatic mat or in the electrostatic bag. 9.
Replacing and Troubleshooting Hardware Components g003834 Figure 44: Inserting the Compact Flash Disk NOTE: On some Services Routers the compact flash is in a horizontal position. If the compact flash connection is horizontal, lay the compact flash behind the slot and slide it forward until it clicks into place. 10. Slide the cover onto the chassis. 11. Replace and tighten the screws on the sides and top of the chassis that secure the cover to the chassis. 12. Replace the power cord or cable. 13.
J4350 and J6350 Services Router Getting Started Guide NOTE: For a list of supported USB storage devices, see the J-series Services Router Release Notes at http://www.juniper.net. To remove and install a USB storage device, perform the following procedures: Removing the USB Storage Device on page 154 Installing the USB Storage Device on page 155 Removing the USB Storage Device NOTE: Depending on your configuration, the Services Router might not have a USB storage device.
Replacing and Troubleshooting Hardware Components Installing the USB Storage Device To install the USB storage device: NOTE: For a list of supported USB storage devices, see the J-series Services Router Release Notes at http://www.juniper.net. 1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to the ESD point on the chassis, or to an outside ESD point if the router is disconnected from earth ground.
J4350 and J6350 Services Router Getting Started Guide Figure 45: J4350 and J6350 DRAM Location g003841 DRAM To modify the DRAM configuration, use the following procedures: Removing a DRAM Module on page 156 Installing a DRAM Module on page 157 Removing a DRAM Module NOTE: Depending on your configuration, the Services Router might have an empty DRAM socket. If you are adding a DRAM module to the DRAM configuration, proceed directly to “Installing a DRAM Module” on page 157.
Replacing and Troubleshooting Hardware Components 3. Press and release the power button to power off the router. Wait for the POWER LED to turn off. 4. Unplug the power cord or cable from the power source receptacle. 5. Remove the screws from the sides and top of the chassis that secure the cover to the chassis. 6. Slide the cover off the chassis. 7. To release the DRAM module, press the plastic ejectors on both sides of the module (see Figure 46). 8.
J4350 and J6350 Services Router Getting Started Guide 1. Take the following steps if you have not already done so: a. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to the ESD point on the chassis, or to an outside ESD point if the router is disconnected from earth ground. For more information about ESD, see the Getting Started Guide for your router. b. Press and release the power button to power off the router. Wait for the POWER LED to turn off. c.
Replacing and Troubleshooting Hardware Components power supplies are fully redundant. If one power supply fails or is removed, the remaining power supply instantly assumes the entire electrical load. One power supply can provide full power for as long as the router is operational. Each J6350 power supply is hot-insertable and hot-removable. CAUTION: Do not leave a power supply slot empty for more than a short time while the Services Router is operational.
J4350 and J6350 Services Router Getting Started Guide 6. Insert the appliance coupler end of the replacement power cord into the appliance inlet on the power supply faceplate. 7. Insert the power cord plug into an AC power source receptacle. NOTE: Each power supply must be connected to a dedicated AC power feed. For information about connecting to AC power sources, see “Connecting Power” on page 86. 8.
Replacing and Troubleshooting Hardware Components 8. If you are not reinstalling a power supply into the emptied slot, install a blank power supply panel over the slot. g003812 Figure 47: Removing an AC Power Supply Ejector Installing an AC Power Supply in a J6350 Router To install an AC power supply in a J6350 Services Router (see Figure 48): 1.
J4350 and J6350 Services Router Getting Started Guide 6. Verify that the power cord does not block access to router components or drape where people might trip on it. 7. Press and release the power button to power on the router. Verify that the POWER LED lights steadily after you press the power button. g003811 Figure 48: Installing an AC Power Supply Replacing a DC Power Supply Cable To replace a power cable for a DC power supply: 1.
Replacing and Troubleshooting Hardware Components CAUTION: There is no standard color coding for DC power cables. The color coding used by the external DC power source at your site determines the color coding for the leads on the power cables that attach to the terminal studs on each power supply. You must ensure that power connections maintain the proper polarity. The power source cables might be labeled (+) and (–) to indicate their polarity. 5. Remove the power cable from the DC power source. 6.
J4350 and J6350 Services Router Getting Started Guide the router is disconnected from earth ground. For more information about ESD, see “Preventing Electrostatic Discharge Damage” on page 205. 2. Press and release the power button to power off the Services Router. Wait for the POWER LED to turn off. 3. Ensure that the voltage across the DC power source cable leads is 0 V and that the cable leads cannot become active during installation. CAUTION: There is no standard color coding for DC power cables.
Replacing and Troubleshooting Hardware Components g003814 Figure 49: Removing a DC Power Supply Ejector Installing a DC Power Supply in a J6350 Router Each power supply in a DC-powered router must be connected to earth ground. A ground terminal is provided on each DC power supply for this purpose. To install a DC power supply in a J6350 Services Router (see Figure 50): 1.
J4350 and J6350 Services Router Getting Started Guide 5. Use a Phillips screwdriver to remove the clear plastic cover protecting the terminal block. 6. Within the terminal block, remove the two center screws next to the labels –48 VDC and RTN. Each screw contains a captive washer to secure a power cable lug to the terminal block. 7. Using one of the removed screws, secure the positive (+) DC source power cable lug to the RTN terminal. Tighten the screw until snug. Do not overtighten.
Replacing and Troubleshooting Hardware Components Removing and Installing a Crypto Accelerator Module The Crypto Accelerator Module is a processor card that enhances performance of cryptographic algorithms used in IP security (IPSec) services. The Crypto Module is a standard feature on J6350 Services Routers and an optional feature on J4350 Services Routers. Figure 51 shows the location of the Crypto Accelerator Module.
J4350 and J6350 Services Router Getting Started Guide To remove the Crypto Accelerator Module: 1. Place an electrostatic bag or antistatic mat on a flat stable surface to receive the Crypto Module. 2. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to the ESD point on the chassis, or to an outside ESD point if the router is disconnected from earth ground. For more information about ESD, see “Preventing Electrostatic Discharge Damage” on page 205. 3.
Replacing and Troubleshooting Hardware Components Figure 53: Removing and Installing a Crypto Accelerator Module Remove Install g003816 Release clips 9. Slide the Crypto Module out of its socket. 10. Remove the standoff washer that was under the Crypto Module. 11. Place the Crypto Module on the antistatic mat or in the electrostatic bag. Installing a Crypto Accelerator Module To install a Crypto Accelerator Module: 1. Take the following steps if you have not already done so: a.
J4350 and J6350 Services Router Getting Started Guide 5. Push the Crypto Module down flat against the main board until the release clips click into place, as shown in Figure 53. 6. Insert the standoff washer under the Crypto Module. 7. Insert the screw and tighten it until snug. Do not overtighten. 8. Slide the cover onto the router, and replace and tighten the cover screws. 9. Replace the power cord or cable. 10. Press and release the power button to power on the router.
Replacing and Troubleshooting Hardware Components Figure 54: Attaching Air Filter and Filter Cover Air filter Filter cover 0 PORT W PO ER M AR TU STA STATUS S HA R POWE T RESE IG CONF g003819 AL Cover latches We recommend changing the filter every 6 months. However, the optimal filter replacement interval can vary depending on the environment where the router is located. If temperature alarms appear, inspect the air filter. To replace the air filter: 1.
J4350 and J6350 Services Router Getting Started Guide To view a more detailed description of the alarm cause, issue the show chassis alarms CLI command: user@host> show chassis alarms Table 46 describes alarms that can occur for a chassis component such as the Routing Engine or a Physical Interface Module (PIM).
Replacing and Troubleshooting Hardware Components Table 46: Chassis Alarm Conditions and Corrective Actions (continued) Component Alarm Conditions Corrective Action Alarm Severity Routing Engine An error occurred during the process of reading or writing compact flash. Reformat the compact flash and install a bootable image. (See the J-series Services Router Administration Guide.) Yellow (minor) If this remedy fails, you must replace the failed Routing Engine.
J4350 and J6350 Services Router Getting Started Guide 174 Troubleshooting Hardware Components
Chapter 12 Contacting Customer Support and Returning Hardware This chapter describes how to return the Services Router or individual components to Juniper Networks for repair or replacement.
J4350 and J6350 Services Router Getting Started Guide J4350 and J6350 Services Routers have two serial number ID labels, one on the back of the chassis, as shown in Figure 55, and one on the bottom front corner, as shown in Figure 56.
Contacting Customer Support and Returning Hardware Figure 56: Location of Serial Number ID Label on Bottom of Chassis 0 PO ER W PO S STATU RT 0 S TU STA RM ALA HA POWER RESET G CONFI 1 PORT S STATU 1 LE AUX CONSO NUMBER SLOT 4 1 5 E 2 6 E 3 USB 0 10/100/100 J-4350-JB-DC-N 0156012006000098 0010dbd38580 This device complies with Part 15 of the FCC Rules.
J4350 and J6350 Services Router Getting Started Guide Contacting Customer Support After you have located the serial numbers of the components you need to return, contact Juniper Networks Technical Assistance Center (JTAC) in one of the following ways. You can contact JTAC 24 hours a day, seven days a week. On the Web, using the Case Manager link at http://www.juniper.
Contacting Customer Support and Returning Hardware For product problems or technical support issues, open a support case using the Case Manager link at http://www.juniper.net/support/, or call 1-888-314-JTAC (within the United States) or 1-408-745-9500 (outside the United States). When you need to return a component, follow this procedure: 1. Determine the part number and serial number of the component. For instructions, see “Locating Component Serial Numbers” on page 175. 2.
J4350 and J6350 Services Router Getting Started Guide Flat-blade screwdriver, approximately 1/4 in. (6 mm) Phillips (+) screwdrivers, numbers 1 and 2 Packing the Services Router for Shipment To pack the router for shipment, follow this procedure: 1. Retrieve the shipping carton and packing materials in which the router was originally shipped. If you do not have these materials, contact your Juniper Networks representative about approved packaging materials. 2.
Contacting Customer Support and Returning Hardware Packing Components for Shipment To pack and ship individual components, follow these guidelines: When you return components, make sure they are adequately protected with packing materials and packed so that the pieces are prevented from moving around inside the carton. Use the original shipping materials if they are available. Place individual boards in electrostatic bags. Write the RMA number on the exterior of the box to ensure proper tracking.
J4350 and J6350 Services Router Getting Started Guide 182 Packing a Router or Component for Shipment
Part 4 J-series Requirements and Specifications Network Cable Specifications and Connector Pinouts on page 185 Safety and Regulatory Compliance Information on page 201 J-series Requirements and Specifications 183
184 J-series Requirements and Specifications
Chapter 13 Network Cable Specifications and Connector Pinouts The network interfaces supported on the router accept different kinds of network cable. Serial PIM Cable Specifications on page 185 RJ-45 Connector Pinout for Fast Ethernet Ports on page 194 RJ-45 Connector Pinout for Gigabit Ethernet Ports on page 195 Console Port Pinouts on page 195 E1 and T1 RJ-48 Cable Pinouts on page 196 E3 and T3 BNC Connector Pinout on page 198 ADSL and G.
J4350 and J6350 Services Router Getting Started Guide Table 47: 2-Port Serial PIM Cables and Connectors (continued) End-to-End Conductors Pinouts 4-40 threaded jackscrews 23 Table 52 DB-25 female 4-40 threaded jacknuts 22 Table 53 V.35 DTE M/34 male Standard (Normally included with M/34 connector shell) 18 Table 54 V.35 DCE M/34 female Standard (Normally included with M/34 connector shell) 18 Table 55 X.21 DTE DB-15 male M3 threaded jackscrews 13 Table 56 X.
Network Cable Specifications and Connector Pinouts Table 48: RS-232 DTE Cable Pinout (continued) LFH-60 Pin DB-25 Pin LFH-60 Pairing Description 22 to 21 – – – 18 to 17 – – – RS-232 DCE Cable Pinout Table 49: RS-232 DCE Cable Pinout LFH-60 Pin DB-25 Pin LFH-60 Pairing Description 15 1 – Frame Ground 1 2 – Transmit Data 60 3 – Receive Data 4 – Request to Send 5 – Clear to Send 33 6 – Data Set Ready 57 7 – Signal Ground 13 8 – Data Carrier Detect 56 15 – Trans
J4350 and J6350 Services Router Getting Started Guide Table 50: RS-422/449 (EIA-449) DTE Cable Pinout (continued) LFH-60 Pin DC-37 (DB-37) Pin LFH-60 Pairing Description 37 9 38 Clear to Send (A) 41 10 – Local Loopback 9 11 10 Data Mode (A) 33 12 34 Terminal Ready (A) 13 13 14 Receive Ready (A) 52 17 51 Terminal Timing (A) 36 19 – Signal Ground 4 20 – Receive Common 59 22 60 Send Data (B) 55 23 56 Send Timing (B) 2 24 1 Receive Data (B) 47 25 48 Request to
Network Cable Specifications and Connector Pinouts Table 51: RS-422/449 (EIA-449) DCE Cable Pinout (continued) LFH-60 Pin DC-37 (DB-37) Pin LFH-60 Pairing Description 33 11 34 Data Mode (A) 9 12 10 Terminal Ready (A) 13 13 14 Receive Ready (A) 5 17 6 Terminal Timing (A) 36 19 – Signal Ground 4 20 – Receive Common 2 22 1 Send Data (B) 55 23 56 Send Timing (B) 59 24 60 Receive Data (B) 38 25 37 Request to Send (B) 51 26 52 Receive Timing (B) 47 27 48 Clear t
J4350 and J6350 Services Router Getting Started Guide Table 52: EIA-530A DTE Cable Pinout (continued) LFH-60 Pin DB-25 Pin LFH-60 Pairing Description 14 10 13 Received Line Signal Detector (B) 51 11 52 Terminal Timing (B) 55 12 56 Transmit Clock (B) 38 13 37 Clear to Send (B) 59 14 60 Transmit Data (B) 56 15 55 Transmit Clock (A) 2 16 1 Receive Data (B) 5 17 6 Receive Clock (A) 41 18 – Local Loopback 47 19 48 Request to Send (B) 33 20 – Data Terminal Ready (A)
Network Cable Specifications and Connector Pinouts Table 53: EIA-530A DCE Cable Pinout (continued) LFH-60 Pin DB-25 Pin LFH-60 Pairing Description 55 12 56 Transmit Clock (B) 47 13 48 Clear to Send (B) 2 14 1 Transmit Data (B) 56 15 55 Transmit Clock (A) 59 16 60 Receive Data (B) 52 17 51 Receive Clock (A) 45 18 – Local Loopback 38 19 37 Request to Send (B) 9 20 – Data Terminal Ready (A) 4 23 – Signal Ground 5 24 6 Terminal Timing (A) 26 to 25 – – – 30 to
J4350 and J6350 Services Router Getting Started Guide Table 54: V.35 DTE Cable Pinout (continued) LFH-60 Pin M/34 Pin LFH-60 Pairing Description 56 Y 55 Transmit Timing (A) 55 AA 56 Transmit Timing (B) 22 to 21 – – – 26 to 25 – – – 18 to 17 – – – V.35 DCE Cable Pinout Table 55: V.
Network Cable Specifications and Connector Pinouts Table 55: V.35 DCE Cable Pinout (continued) LFH-60 Pin M/34 Pin LFH-60 Pairing Description 22 to 21 – – – 26 to 25 – – – X.21 DTE Cable Pinout Table 56: X.
J4350 and J6350 Services Router Getting Started Guide Table 57: X.21 DCE Cable Pinout (continued) LFH-60 Pin DB-15 Pin LFH-60 Pairing Description 57 8 – Signal Ground 2 9 1 Transmit Data (B) 38 10 37 Control (B) 59 11 60 Receive (B) 47 12 48 Indicate (B) 51 13 52 Signal Element Timing (B) 30 to 29 – – – RJ-45 Connector Pinout for Fast Ethernet Ports Table 58 describes the RJ-45 connector pinout information.
Network Cable Specifications and Connector Pinouts Table 58: Fast Ethernet RJ-45 Connector Pinout (continued) Pin Signal 7 Termination network 8 Termination network RJ-45 Connector Pinout for Gigabit Ethernet Ports Table 59: Gigabit Ethernet RJ-45 Connector Pinout Pin Signal 1 MDI0+ 2 MDI0- 3 MDI1+ 4 MDI2+ 5 MDI2- 6 MDI1- 7 MDI3+ 8 MDI3- Console Port Pinouts The console port on a J-series Services Router has an RJ-45 connector.
J4350 and J6350 Services Router Getting Started Guide Table 60: RJ-45 Console Connector Pinout (continued) Pin Signal Description 7 DSR Input Data Set Ready 8 CTS Input Clear to Send Table 61 describes the DB-9 connector pinouts.
Network Cable Specifications and Connector Pinouts Table 62: RJ-48 Connector to RJ-48 Connector (Straight) Pinout (continued) RJ-48 Pin (on T1/E1 PIM) (Data Numbering Form) RJ-48 Pin (Data Numbering Form) Signal 3 3 Shield/Return/Ground 6 6 Shield/Return/Ground 7 No connect No connect 8 No connect No connect Table 63: RJ-48 Connector to RJ-48 Connector (Crossover) Pinout RJ-48 Pin (on T1/E1 PIM) (Data numbering form) RJ-48 Pin (Data numbering form) Signal 1 4 RX/Ring/– <––>TX/Ring/– 2
J4350 and J6350 Services Router Getting Started Guide Table 64: RJ-48 Connector to DB-15 Connector (Straight) Pinout (continued) RJ-48 Pin (on T1/E1 PIM) (Data numbering form) DB-15 Pin (Data numbering form) Signal 11 No connect No connect 12 No connect No connect 13 No connect No connect 14 No connect No connect 15 No connect No connect Table 65: RJ-48 Connector to DB-15 Connector (Crossover) Pinout RJ-48 Pin (on T1/E1 PIM) (Data numbering form) DB-15 Pin (Data numbering form) Signal
Network Cable Specifications and Connector Pinouts ADSL and G.SHDSL RJ-11 Connector Pinout The 1-port ADSL 2/2+ Annex A and Annex B PIMs use an RJ-11 cable, which is not supplied with the PIMs. The 2-port G.SHDSL Annex A and Annex B PIM also uses an RJ-11 cable, which is not supplied with the PIM. Table 66 describes the RJ-11 connector pinout. Table 66: ADSL and G.
J4350 and J6350 Services Router Getting Started Guide 200 ISDN RJ-45 Connector Pinout
Chapter 14 Safety and Regulatory Compliance Information To install and use the Services Router safely, follow proper safety procedures.
J4350 and J6350 Services Router Getting Started Guide WARNING: Waarschuwing Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico’s en dient u op de hoogte te zijn van standaard maatregelen om ongelukken te voorkomen. WARNING: Varoitus Tämä varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi johtaa ruumiinvammaan.
Safety and Regulatory Compliance Information WARNING: Aviso Este símbolo de aviso indica perigo. Encontra-se numa situação que lhe poderá causar danos físicos. Antes de começar a trabalhar com qualquer equipamento, familiarize-se com os perigos relacionados com circuitos eléctricos, e com quaisquer práticas comuns que possam prevenir possíveis acidentes. WARNING: ¡Atención! Este símbolo de aviso significa peligro. Existe riesgo para su integridad física.
J4350 and J6350 Services Router Getting Started Guide Keep the area around the chassis clear and free from dust before, during, and after installation. Keep tools away from areas where people could trip over them while walking. Do not wear loose clothing or jewelry, such as rings, bracelets, or chains, which could become caught in the chassis. Wear safety glasses if you are working under any conditions that could be hazardous to your eyes.
Safety and Regulatory Compliance Information Varoitus Ainoastaan koulutettu ja pätevä henkilökunta saa asentaa tai vaihtaa tämän laitteen. Attention Tout installation ou remplacement de l’appareil doit être réalisé par du personnel qualifié et compétent. Warnung Gerät nur von geschultem, qualifiziertem Personal installieren oder auswechseln lassen. WARNING: Avvertenza Solo personale addestrato e qualificato deve essere autorizzato ad installare o sostituire questo apparecchio.
J4350 and J6350 Services Router Getting Started Guide Avoid contact between the component and your clothing. ESD voltages emitted from clothing can still damage components. When removing or installing a component, always place it component-side up on an antistatic surface, in an antistatic card rack, or in an electrostatic bag (see Figure 57). If you are returning a component, place it in an electrostatic bag before packing it.
Safety and Regulatory Compliance Information Warning Statement for Norway and Sweden on page 215 In Case of Electrical Accident on page 215 Multiple Power Supplies Disconnection Warning on page 215 Power Disconnection Warning on page 217 TN Power Warning on page 218 Telecommunication Line Cord Warning on page 219 General Electrical Safety Guidelines Install the Services Router in compliance with the following local, national, or international electrical codes: United States—National Fire Protection Associ
J4350 and J6350 Services Router Getting Started Guide AC Power Electrical Safety Guidelines The following electrical safety guidelines apply to AC-powered routers: AC-powered routers are shipped with a three-wire electrical cord with a grounding-type plug that fits only a grounding-type power outlet. Do not circumvent this safety feature. Equipment grounding should comply with local and national electrical codes.
Safety and Regulatory Compliance Information DC Power Electrical Safety Guidelines The following electrical safety guidelines apply to a DC-powered router: A DC-powered router is equipped with a DC terminal block that is rated for the power requirements of a maximally configured router. To supply sufficient power, terminate the DC input wiring on a facility DC source capable of supplying at least 8 A @ –48 VDC. Incorporate an easily accessible disconnect device into the facility wiring.
J4350 and J6350 Services Router Getting Started Guide DC Power Disconnection Warning WARNING: Before performing any of the following procedures, ensure that power is removed from the DC circuit. To ensure that all power is off, locate the circuit breaker on the panel board that services the DC circuit, switch the circuit breaker to the OFF position, and tape the switch handle of the circuit breaker in the OFF position.
Safety and Regulatory Compliance Information asegurarse de que toda la alimentación esté cortada (OFF), localizar el interruptor automático en el panel que alimenta al circuito de corriente continua, cambiar el interruptor automático a la posición de Apagado (OFF), y sujetar con cinta la palanca del interruptor automático en posición de Apagado (OFF). Varning! Innan du utför någon av följande procedurer måste du kontrollera att strömförsörjningen till likströmskretsen är bruten.
J4350 and J6350 Services Router Getting Started Guide Varning! Vid installation av enheten måste jordledningen alltid anslutas först och kopplas bort sist. DC Power Wiring Sequence Warning WARNING: Wire the DC power supply using the appropriate lugs. When connecting power, the proper wiring sequence is ground to ground, +RTN to +RTN, then -48 V to -48 V. When disconnecting power, the proper wiring sequence is -48 V to -48 V, +RTN to +RTN, then ground to ground.
Safety and Regulatory Compliance Information a +RTN, entonces molió para moler. Observe que el alambre de tierra se debe conectar siempre primero y desconectar por último. Observe que el alambre de tierra se debe conectar siempre primero y desconectar por último. ¡Atención! Wire a fonte de alimentação de DC Usando os talões apropriados na extremidade da fiação. Ao conectar a potência, a seqüência apropriada da fiação é moída para moer, +RTN a +RTN, então -48 V a -48 V.
J4350 and J6350 Services Router Getting Started Guide Advarsel Hvis det er nødvendig med flertrådede ledninger, brukes godkjente ledningsavslutninger, som for eksempel lukket sløyfe eller spadetype med oppoverbøyde kabelsko. Disse avslutningene skal ha riktig størrelse i forhold til ledningene, og skal klemme sammen både isolasjonen og lederen.
Safety and Regulatory Compliance Information Aviso Este equipamento deverá estar ligado à terra. Certifique-se que o host se encontra ligado à terra durante a sua utilização normal. ¡Atención! Este equipo debe conectarse a tierra. Asegurarse de que el equipo principal esté conectado a tierra durante el uso normal. Varning! Denna utrustning är avsedd att jordas. Se till att värdenheten är jordad vid normal användning.
J4350 and J6350 Services Router Getting Started Guide WARNING: Varoitus Tässä laitteessa on useampia virtalähdekytkentöjä. Kaikki kytkennät on irrotettava kokonaan, jotta virta poistettaisiin täysin laitteesta. WARNING: Attention Cette J6350 unité est équipée de plusieurs raccordements d’alimentation. Pour supprimer tout courant électrique de l’unité, tous les cordons d’alimentation doivent être débranchés.
Safety and Regulatory Compliance Information WARNING: Varning! Denna J6350 enhet har mer än en strömförsörjningsanslutning; alla anslutningar måste vara helt avlägsnade innan strömtillförseln till enheten är fullständigt bruten. Power Disconnection Warning WARNING: Before working on the router or near power supplies, unplug the power cord from an AC router.
J4350 and J6350 Services Router Getting Started Guide WARNING: Advarsel Før det utføres arbeid på kabinettet eller det arbeides i nærheten av strømforsyningsenheter, skal strømledningen trekkes ut på vekselstrømsenheter. WARNING: Aviso Antes de trabalhar num chassis, ou antes de trabalhar perto de unidades de fornecimento de energia, desligue o cabo de alimentação nas unidades de corrente alternada.
Safety and Regulatory Compliance Information WARNING: Attention Ce dispositif a été conçu pour fonctionner avec des systèmes d’alimentation TN. WARNING: Warnung Das Gerät ist für die Verwendung mit TN-Stromsystemen ausgelegt. WARNING: Avvertenza Il dispositivo è stato progettato per l’uso con sistemi di alimentazione TN. WARNING: Advarsel Utstyret er utfomet til bruk med TN-strømsystemer. WARNING: Aviso O dispositivo foi criado para operar com sistemas de corrente TN.
J4350 and J6350 Services Router Getting Started Guide WARNING: Waarschuwing Om brandgevaar te reduceren, dient slechts telecommunicatielijnsnoer nr. 26 AWG of groter gebruikt te worden. WARNING: Varoitus Tulipalovaaran vähentämiseksi käytä ainoastaan nro 26 AWGtai paksumpaa tietoliikennejohdinta. WARNING: Attention Pour réduire les risques d’incendie, n’utiliser que des cordons de lignes de télécommunications de type AWG nº 26 ou plus larges.
Safety and Regulatory Compliance Information WARNING: Varning! För att minska brandrisken skall endast Nr. 26 AWG eller större telekommunikationsledning användas.
J4350 and J6350 Services Router Getting Started Guide Warnung Lesen Sie die Installationsanweisungen, bevor Sie das System an die Stromquelle anschließen. WARNING: Avvertenza Consultare le istruzioni di installazione prima di collegare il sistema all’alimentatore. Advarsel Les installasjonsinstruksjonene før systemet kobles til strømkilden. Aviso Leia as instruções de instalação antes de ligar o sistema à sua fonte de energia.
Safety and Regulatory Compliance Information voorzorgsmaatregelen nemen om ervoor te zorgen dat het toestel stabiel blijft. De onderstaande richtlijnen worden verstrekt om uw veiligheid te verzekeren: De Juniper Networks router moet in een stellage worden geïnstalleerd die aan een bouwsel is verankerd. Dit toestel dient onderaan in het rek gemonteerd te worden als het toestel het enige in het rek is.
J4350 and J6350 Services Router Getting Started Guide Si cette unité est montée dans un casier partiellement rempli, charger le casier de bas en haut en plaçant l’élément le plus lourd dans le bas. Si le casier est équipé de dispositifs stabilisateurs, installer les stabilisateurs avant de monter ou de réparer l’unité en casier.
Safety and Regulatory Compliance Information WARNING: Advarsel Unngå fysiske skader under montering eller reparasjonsarbeid på denne enheten når den befinner seg i et kabinett. Vær nøye med at systemet er stabilt. Følgende retningslinjer er gitt for å verne om sikkerheten: Juniper Networks router må installeres i et stativ som er forankret til bygningsstrukturen. Denne enheten bør monteres nederst i kabinettet hvis dette er den eneste enheten i kabinettet.
J4350 and J6350 Services Router Getting Started Guide Cuando este equipo se vaya a instalar en un bastidor parcialmente ocupado, comenzar la instalación desde la parte inferior hacia la superior colocando el equipo más pesado en la parte inferior. Si el bastidor dispone de dispositivos estabilizadores, instalar éstos antes de montar o proceder al mantenimiento del equipo instalado en el bastidor.
Safety and Regulatory Compliance Information ¡Atención! No usar una rampa inclinada más de 10 grados Varning! Använd inte ramp med en lutning på mer än 10 grader. Laser and LED Safety Guidelines and Warnings Single-mode Physical Interface Modules (PIMs) are equipped with laser transmitters, which are considered a Class 1 Laser Product by the U.S. Food and Drug Administration, and are evaluated as a Class 1 Laser Product per EN 60825–1 +A11 +A2 requirements.
J4350 and J6350 Services Router Getting Started Guide Waarschuwing Klasse-1 laser produkt. Varoitus Luokan 1 lasertuote. Attention Produit laser de classe I. Warnung Laserprodukt der Klasse 1. WARNING: Avvertenza Prodotto laser di Classe 1. Advarsel Laserprodukt av klasse 1. Aviso Produto laser de classe 1. ¡Atención! Producto láser Clase I. Varning! Laserprodukt av klass 1. Class 1 LED Product Warning WARNING: Class 1 LED product. Waarschuwing Klasse 1 LED-product. Varoitus Luokan 1 valodiodituote.
Safety and Regulatory Compliance Information Laser Beam Warning WARNING: Do not stare into the laser beam or view it directly with optical instruments. WARNING: Waarschuwing Niet in de straal staren of hem rechtstreeks bekijken met optische instrumenten. WARNING: Varoitus Älä katso säteeseen äläkä tarkastele sitä suoraan optisen laitteen avulla. WARNING: Attention Ne pas fixer le faisceau des yeux, ni l’observer directement à l’aide d’instruments optiques.
J4350 and J6350 Services Router Getting Started Guide WARNING: ¡Atención! No mirar fijamente el haz ni observarlo directamente con instrumentos ópticos. WARNING: Varning! Rikta inte blicken in mot strålen och titta inte direkt på den genom optiska instrument. Radiation from Open Port Apertures Warning WARNING: Because invisible radiation may be emitted from the aperture of the port when no fiber cable is connected, avoid exposure to radiation and do not stare into open apertures.
Safety and Regulatory Compliance Information WARNING: Avvertenza Quando i cavi in fibra non sono inseriti, radiazioni invisibili possono essere emesse attraverso l’apertura della porta. Evitate di esporvi alle radiazioni e non guardate direttamente nelle aperture. WARNING: Advarsel Unngå utsettelse for stråling, og stirr ikke inn i åpninger som er åpne, fordi usynlig stråling kan emiteres fra portens åpning når det ikke er tilkoblet en fiberkabel.
J4350 and J6350 Services Router Getting Started Guide Battery Handling Warning WARNING: Replacing the battery incorrectly might result in an explosion. Replace the battery only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. WARNING: Waarschuwing Er is ontploffingsgevaar als de batterij verkeerd vervangen wordt. Vervang de batterij slechts met hetzelfde of een equivalent type dat door de fabrikant aanbevolen is.
Safety and Regulatory Compliance Information WARNING: Avvertenza Pericolo di esplosione se la batteria non è installata correttamente. Sostituire solo con una di tipo uguale o equivalente, consigliata dal produttore. Eliminare le batterie usate secondo le istruzioni del produttore. WARNING: Aviso Existe perigo de explosão se a bateria for substituída incorrectamente. Substitua a bateria por uma bateria igual ou de um tipo equivalente recomendado pelo fabricante.
J4350 and J6350 Services Router Getting Started Guide WARNING: Varoitus Ennen kuin työskentelet voimavirtajohtoihin kytkettyjen laitteiden parissa, ota pois kaikki korut (sormukset, kaulakorut ja kellot mukaan lukien). Metalliesineet kuumenevat, kun ne ovat yhteydessä sähkövirran ja maan kanssa, ja ne voivat aiheuttaa vakavia palovammoja tai hitsata metalliesineet kiinni liitäntänapoihin.
Safety and Regulatory Compliance Information a ligação à terra, podendo causar queimaduras graves ou ficarem soldados aos terminais. WARNING: ¡Atención! Antes de operar sobre equipos conectados a líneas de alimentación, quitarse las joyas (incluidos anillos, collares y relojes). Los objetos de metal se calientan cuando se conectan a la alimentación y a tierra, lo que puede ocasionar quemaduras graves o que los objetos metálicos queden soldados a los bornes.
J4350 and J6350 Services Router Getting Started Guide WARNING: Warnung Arbeiten Sie nicht am System und schließen Sie keine Kabel an bzw. trennen Sie keine ab, wenn es gewittert. WARNING: Avvertenza Non lavorare sul sistema o collegare oppure scollegare i cavi durante un temporale con fulmini. WARNING: Advarsel Utfør aldri arbeid på systemet, eller koble kabler til eller fra systemet når det tordner eller lyner.
Safety and Regulatory Compliance Information WARNING: Waarschuwing Om te voorkomen dat welke router van de Juniper Networks router dan ook oververhit raakt, dient u deze niet te bedienen op een plaats waar de maximale aanbevolen omgevingstemperatuur van 40οC wordt overschreden. Om te voorkomen dat de luchtstroom wordt beperkt, dient er minstens 15,2 cm speling rond de ventilatie-openingen te zijn.
J4350 and J6350 Services Router Getting Started Guide WARNING: Aviso Para evitar o sobreaquecimento do encaminhador Juniper Networks router, não utilize este equipamento numa área que exceda a temperatura máxima recomendada de 40οC. Para evitar a restrição à circulação de ar, deixe pelo menos um espaço de 15,2 cm à volta das aberturas de ventilação.
Safety and Regulatory Compliance Information WARNING: Attention La mise au rebut définitive de ce produit doit être effectuée conformément à toutes les lois et réglementations en vigueur. WARNING: Warnung Dieses Produkt muß den geltenden Gesetzen und Vorschriften entsprechend entsorgt werden.
J4350 and J6350 Services Router Getting Started Guide Agency Approvals The Services Router complies with the following standards: Safety CAN/CSA-22.2 No.
Safety and Regulatory Compliance Information Compliance Statements for Environmental Requirements Lithium Battery Batteries in this product are not based on mercury, lead, or cadmium substances. The batteries used in this product are in compliance with EU Directives 91/157/EEC, 93/86/EEC, and 98/101/EEC. The product documentation includes instructional information on the proper method of reclamation and recycling.
J4350 and J6350 Services Router Getting Started Guide CAUTION: Users should not attempt to make electrical ground connections by themselves, but should contact the appropriate inspection authority or an electrician, as appropriate. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.
Safety and Regulatory Compliance Information European Community Declaration of Conformity Juniper Networks, Inc. 1194 N. Mathilda Ave Sunnyvale, CA.
J4350 and J6350 Services Router Getting Started Guide Japan The preceding translates as follows: This is a Class B product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this product is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.
Safety and Regulatory Compliance Information FCC Part 15 Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
J4350 and J6350 Services Router Getting Started Guide Product Reclamation and Recycling Program Juniper Networks is committed to environmentally responsible behavior. As part of this commitment, we continually work to comply with environmental standards such as the European Union’s Waste Electrical and Electronic Equipment (WEEE) Directive and Restriction of Hazardous Substances (RoHS) Directive.
Part 5 Index Index 247
248 Index
Index Symbols [ ], in configuration statements . . . . . . . . . . . . . . . . . . . . . . . . xvii { }, in configuration statements . . . . . . . . . . . . . . . . . . . . . . . xvii ( ), in syntax descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii < >, in syntax descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii | (pipe), in syntax descriptions . . . . . . . . . . . . . . . . . . . . . . . . . xvii * (red asterisk) . . . . . . . . . . . . . . . . . . . . . .
J4350 and J6350 Services Router Getting Started Guide host-specific configuration file . . . . . . . . . . . . . . . . . . . . 127 interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 IP address procurement process . . . . . . . . . . . . . . . . . . 126 J-Web configuration editor . . . . . . . . . . . . . . . . . . . . . . . . 128 overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index component serial number labels . . . . . . . . . . . . . . . . . 175 dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 environmental tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . .73 grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86 J4350 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 J6350 . . . . . . . . . . . . . . . . . . . . . .
J4350 and J6350 Services Router Getting Started Guide Copper Gigabit Ethernet ePIMs link speeds and transmission modes supported . . .32 overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 cords See AC power cords; cables; DC power cables Crypto Accelerator Module description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index E3 ports BNC connector pinouts. . . . . . . . . . . . . . . . . . . . . . . . . . . . 198 description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 LED states. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 earth ground See grounding earthquakes rack-mount requirements . . . . . . . . . . . . . . . . . . . . . . . . . . .73 seismic requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
J4350 and J6350 Services Router Getting Started Guide G.SHDSL ports See SHDSL ports gateway, default. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96 ge-0/0/0 connecting through J-Web. . . . . . . . . . . . . . . . . . . . . . . . . . .99 defining address (configuration editor) . . . . . . . . . . . .112 defining address (Quick Configuration). . . . . . . . . . . 107 for autoinstallation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index licenses (J-Web) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 PIM cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 PIMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71 requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
J4350 and J6350 Services Router Getting Started Guide 4-Port ISDN BRI S/T PIM. . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 4-Port ISDN BRI U PIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 ADSL PIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 boot devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 boot sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index J6350 power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 LAN port status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 LINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 33 link activity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 link status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
J4350 and J6350 Services Router Getting Started Guide middle pane. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 midplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 minor (yellow) alarms alternative boot device . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 primary compact flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 Routing Engine . . . . . . . . . . . . . . . . . .
Index V.35 DCE serial cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192 V.35 DTE serial cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191 X.21 DCE serial cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 X.21 DTE serial cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 plug types, AC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 ports 0 . . . . . . . . . . . . . . . . . . . . . . . .
J4350 and J6350 Services Router Getting Started Guide red asterisk (*) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 redundant J6350 power supplies description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 safety guidelines for power sources . . . . . . . . . . . . . . 209 regulatory compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 release notes, URL . . . . . . . . . . . . . . . . . . .
Index DC power wiring terminations warning . . . . . . . . . . 213 DC power, grounding requirements and warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .211 DC power, redundant power supplies . . . . . . . . . . . . 209 electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 general . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 grounded equipment . . . . . . . . . . . . .
J4350 and J6350 Services Router Getting Started Guide SFP Gigabit Ethernet ePIMs overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 SFPs supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 SFPs (small form-factor pluggable transceivers), on Gigabit Ethernet ePIMs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 SHDSL ports description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index symmetric high-speed digital subscriber line See SHDSL syntax conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi system overview hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 system time defining (Quick Configuration) . . . . . . . . . . . . . . . . . . . . 107 overview . . . . . . . . . . . . . . . . .
J4350 and J6350 Services Router Getting Started Guide W warnings battery handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232 DC power cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 DC power disconnection . . . . . . . . . . . . . . . . . . . . . . . . . . 210 DC power plant and chassis ground . . . . . . . . . . . . . . . .78 DC wiring sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 DC wiring terminations . . . . . .