Services Routers Hardware Guide

Table 1: Tasks and Related Documentation (continued)
Related DocumentationTask
■
JUNOS Software Interfaces and Routing Configuration Guide
■
JUNOS Software CLI Reference
Configuring device interfaces
Deployment Planning and Configuration
JUNOS Software with Enhanced Services Design and
Implementation Guide (J-series Services Routers only)
■
Understanding and gathering information required to
design network firewalls and IPsec VPNs
■
Implementing a JUNOS software with enhanced services
firewall from a sample scenario
■
Implementing a policy-based IPsec VPN from a sample
scenario
Security Configuration
■
JUNOS Software Security Configuration Guide
■
JUNOS Software CLI Reference
Configuring and managing the following security services:
■
Stateful firewall policies
■
Zones and their interfaces and address books
■
IPsec VPNs
■
Firewall screens
■
Interface modes: Network Address Translation (NAT)
mode and Router mode
■
Public Key Cryptography (PKI)
■
Application Layer Gateways (ALGs)
■
Chassis clusters
■
Intrusion Detection and Prevention (IDP)
Routing Protocols and Services Configuration
■
JUNOS Software Interfaces and Routing Configuration Guide
■
JUNOS Software CLI Reference
■
Configuring routing protocols, including static routes and
the dynamic routing protocols RIP, OSPF, BGP, and IS-IS
■
Configuring class-of-service (CoS) features, including
traffic shaping and policing
■
Configuring packet-based stateless firewall filters (access
control lists) to control access and limit traffic rates
■
Configuring MPLS to control network traffic patterns
WAN Acceleration Module Installation (Optional)
WXC Integrated Services Module Installation and Configuration
Guide (J-series Services Routers only)
Installing and initially configuring a WXC Integrated Services
Module (ISM 200)
User and System Administration
How to Use This Manual ■ xvii
About This Guide