Services Routers Hardware Guide

Displaying Basic Connectivity Configurations
Purpose Verify the configuration of basic connectivity. Because the basic connectivity settings
appear in different places in the configuration hierarchy, displaying the entire
configuration at once makes viewing the settings easier.
Action From the J-Web interface, select
Configuration>View and Edit>View Configuration Text. Alternatively, from
configuration mode in the CLI, enter the show command. The following sample output
displays the sample values configured in Table 45 on page 111. Your output displays
the values you set.
[edit]
user@host# show
system {
host-name routera;
domain-name lab.router.net;
domain-search [ lab.router.net router.net ];
backup-router 192.168.2.44;
time-zone America/Los_Angeles;
root-authentication {
ssh-rsa "ssh-rsa AAAAB3Nza...D9Y2gXF9ac==[e-mail]";
}
name-server {
10.148.2.32;
}
services {
ssh
}
ntp {
server 10.148.2.21;
}
}
interfaces {
ge-0/0/0 {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
}
lo0 {
unit 0 {
family inet {
address 172.16.1.24/32;
}
}
}
}
Meaning The output shows the configuration of basic connectivity. Verify that the values
displayed are correct for your Services Router.
Related Topics For more information about the format of a configuration file, see the JUNOS CLI
User Guide.
114 ■ Displaying Basic Connectivity Configurations
JUNOS Software with Enhanced Services Hardware Guide