Services Routers Hardware Guide

Using the JUNOS Software with Enhanced Services Configuration Wizard
Before you use the CLI configuration wizard, log in to the Services Router console as
described in “Connecting to the CLI Locally” on page 98 or “Connecting to the CLI
Remotely” on page 100
To invoke the configuration wizard, enter config-wizard at the console prompt. After
you invoke the wizard, it presents the following series of prompts. Follow the prompts
as described in Table 43 on page 107.
Table 43: Basic Configuration Wizard Summary
Your ActionFunctionPrompt
Identification
Type the hostname.
Alphanumeric, hyphen, and
underline characters are allowed.
Defines the hostname of the router.
Enter host name:
Type a plain-text password that
the system encrypts.
NOTE: After a root password has
been defined, it is required when
you log into the J-Web user
interface or the CLI.
Sets the root password that user “root”
can use to log into the router.
Please enter root password:
Retype the password.Verifies that the root password has
been typed correctly.
Retype root password:
Type the domain name.
Alphanumeric, hyphen, period,
and underline characters are
allowed.
Defines the network or subnetwork
that the machine belongs to.
Would you like to configure a domain name? [yes,
no] (no):
If you enter y(es), the configuration wizard
presents the following prompt.
Enter domain name:
Configuring Basic Settings Using the CLI Configuration Wizard ■ 107
Chapter 6: Establishing Basic Connectivity