Services Routers Hardware Guide
To configure basic settings with J-Web Quick Configuration:
1.
If you have not already done so, connect a management device to the ge-0/0/0
interface on port 0/0. For instructions, see “Connecting to the J-Web
Interface” on page 97.
2. If the Set Up Quick Configuration page is not displayed, select
Configuration>Quick Configuration >Set Up.
3. Enter information into the Set Up Quick Configuration page, as described in
Table 42 on page 104.
4. Click one of the following buttons:
■ To apply the configuration and stay in the Set Up Quick Configuration page,
click Apply.
■ To apply the configuration and return to the Quick Configuration page, click
OK.
■ To cancel your entries and return to the Quick Configuration page, click
Cancel.
NOTE: After initial configuration is complete, the Services Router stops functioning
as a DHCP server. If you change the IP address of ge-0/0/0 and have the management
device configured to use DHCP, you lose your DHCP lease and your connection to
the router through the J-Web interface. To reestablish a connection, either set the IP
address on the management device manually, or connect ge-0/0/0 to the
management network and access the router another way—for example, through the
console port.
5. To check the configuration, see “Verifying Basic Connectivity and the
Configuration” on page 113.
Table 42: Set Up Quick Configuration Summary
Your ActionFunctionField
Identification
Type the hostname.Defines the hostname of the router.Host Name
(required)
Type the domain name.Defines the network or subnetwork that the
machine belongs to.
Domain Name
Type a plain-text password that the system encrypts.
NOTE: After a root password has been defined, it is
required when you log in to the J-Web user interface
or the CLI.
Sets the root password that user “root” can
use to log in to the router.
Root Password
(required)
Retype the password.Verifies the root password has been typed
correctly.
Verify Root Password
(required)
104 ■ Configuring Basic Settings with J-Web Quick Configuration
JUNOS Software with Enhanced Services Hardware Guide