Network Scanner Operator's Guide

Network Scanner fi-6000NS Operator's Guide 275
C
NTP Server NTP Server IP Address has not been
entered.
Enter an NTP server IP address.
NTP Server IP Address is incomplete.
Complete the NTP server IP
address.
NTP Server Name has not been entered. Enter an NTP server name.
NTP Server Name contains invalid
characters.
Enter a valid NTP server name.
NTP Server IP address is invalid. Enter a valid NTP server IP
address.
System time has been successfully
synchronized.
No action required.
System time synchronization failed.
Sending resync command to local
computer...
The computer did not resync because
no time data was available.
Try the following:
• Check the NTP server name and
address settings for errors.
• Check the network path
between to the NTP server for
problems.
• The NTP server may be busy.
Wait a short time before trying
again to synchronize the system
time. If that does not work, the
specified server may not be an
NTP server, so try a different
NTP server.
• The specified NTP server
cannot provide a trusted date
and time. It attempted to acquire
the date and time from a higher
level NTP server, but failed. Try
a different NTP server or have
the network administrator
investigate.
System time synchronization failed.
Sending resync command to local
computer...
The computer did not resync because
only stale time data was available.
System time synchronization failed.
Sending resync command to local
computer...
The computer did not resync because
the required time change was too big.
Refer to "3.5.4 Setting the Date/
Time" (page 44), adjust the date/
time, and try again.
Time synchronization has caused the
session to timeout. Logging out now.
No action required.
Screen Message Action