Network Scanner Operator's Guide

272
Scanner Name The new settings will be enabled after
the system has been restarted. Do you
wish to restart the system now or
later?
Now: Restart the system immediately.
Web-login will not be possible until
the restart completes.
Later: The system will be restarted and
the settings enabled when you logout.
Cancel: Cancel the new settings.
Press the [Now] button to cause
the system to restart immediately.
Press the [Later] button to delay
the system restart until other
settings are done.
Press the [Cancel] button to cancel
the new settings.
Scanner
Settings
Multifeed detection limit #2 must be
larger than limit #1.
Re-enter a value for "#2" that is
larger than the value for "#1".
Multifeed detection limit #1 is invalid. Re-enter a value for "#1" that is
between 0 and 510 (mm).
Multifeed detection limit #2 is invalid. Re-enter a value for "#2" that is
between 0 and 510 (mm).
Invalid front side horizontal offset has
been entered.
Re-enter a value for front side
horizontal offset that is between -4
and 4.
Invalid reverse side horizontal offset
has been entered.
Re-enter a value for reverse side
horizontal offset that is between -4
and 4.
Invalid front side vertical offset has
been entered.
Re-enter a value for front side
vertical offset that is between -4
and 4.
Invalid reverse side vertical offset has
been entered.
Re-enter a value for reverse side
vertical offset that is between -4
and 4.
Invalid length magnification
adjustment has been entered.
Re-enter a value for "Length
Magnification" that is between
-3.1 and 3.1 (%).
Date/Time Date/time setting is invalid. Re-enter the date/time using only
valid numbers.
Time adjustment has caused the
session to timeout. Logging out now.
No action required.
Screen Message Action