Network Scanner Operator's Guide

Network Scanner fi-6000NS Operator's Guide 271
C
C.1.1 Administrator Screen Messages
Screen Message Action
Login Login failed. Check the user name and
password, and try again.
Re-enter the user name and
password.
If you forget your password,
contact your FUJITSU scanner
dealer or an authorized FUJITSU
scanner service provider.
Login not possible. Another user is
already logged in.
Only one administrator or user can
login to the scanner at any one
time. After the other user
(administrator or regular) has
logged out, try again.
Logout Do you wish to logout now? (Logout/
Cancel)
Press the [Logout] button to exit
the current session now.
Otherwise, press the [Cancel]
button to continue.
A restart is required to effect the
changed settings. Do you wish to
restart now or later?
Restart: Restart the system
immediately. Web-login will not be
possible until the restart completes.
Cancel: Cancel the logout.
Press the [Restart] button to restart
the system now.
Otherwise, press the [Cancel]
button to continue the current
session.
Scanner Name Scanner name contains invalid
characters.
Re-enter the scanner name using
only specified valid characters.
Do not enter a blank space before
or after the scanner name. Do not
use control characters or any of the
following symbols:
"/\ [ ] : | < > + = ; , ?
Scanner name has not been entered. Enter a scanner name.
Specified scanner name is already
being used.
Enter a different scanner name.