Network Scanner Operator's Guide

3.9 Using the Maintenance Menus
Network Scanner fi-6000NS Operator's Guide 123
Administrator Operations
3
4. Press the [Yes] button.
⇒ After factory default settings have been restored, the scanner is restarted.
ATTENTION
During factory defaults reset, do not press and hold down the startup
button for longer than four seconds, as it may cause the scanner to
function abnormally.
HINT
After the factory default settings are restored, the scanner name, IP
address, and other settings will need to be set again, as described in "3.5
Using the System Settings Menus" (page 34).