Network Scanner Operator's Guide

3.6 Using the Network Settings Menus

Network Scanner fi-6000NS Operator's Guide 85

Administrator Operations

4. Enter an e-mail address to which the alert notification will be sent.

This may be up to 255 characters long. One of the following e-mail address formats must be

used:

• XXXXXXX@IP_address

• XXXXXXX@Host_name

• XXXXXXX@Domain_name

5. To confirm that the entered e-mail address is valid, press the [Test] button.

Check that the test mail successfully arrives at the expected e-mail address.

6. Press the [OK] button.

⇒ The destination for alert notifications is set.

XXXXXXX Comprised of alphanumerics, hyphens (-), periods (.) and

underscores (_).

IP_address Comprised of numbers separated by periods (.).

IP addresses within the following ranges may be used:

1.0.0.1 - 126.255.255.254

128.0.0.1 - 191.255.255.254

192.0.0.1 - 223.255.255.254

Host_name Comprised of alphanumerics and hyphens (-) only. Initial character

may not be a hyphen.

Domain_name Name elements comprised of alphanumerics and hyphens (-) are

separated by periods (.).

Each name element may contain up to 63 characters, and only

alphabetic characters may be used for the last element.