Switch User Manual

Figure 56: Installing an SF Module in an EX8208 Switch
Related Topics Removing an SF Module from an EX8208 Switch on page 217•
• Switch Fabric (SF) Module in an EX8208 Switch on page 28
• SF Module LEDs in an EX8208 Switch on page 29
• Field-Replaceable Units in an EX8208 Switch on page 23
Unpacking a Line Card Used in an EX8200 Switch
The line cards for EX8200 switches are rigid sheet-metal structures that house the line
card components including network ports. The line cards are shipped in a cardboard
carton, secured with foam packing material.
CAUTION: The line cards are maximally protected inside the shipping carton. Do not
unpack the line cards until you are ready to install them in the switch chassis.
Before you unpack a line card:
•
Ensure that you have taken the necessary precautions to prevent ESD damage (see
“Prevention of Electrostatic Discharge Damage on EX Series Switches” on page 292).
•
Ensure that you know how to handle and store the line card (see “Handling and Storing
Line Cards in EX8200 Switches” on page 227).
To unpack a line card (see Figure 57 on page 160):
159Copyright © 2010, Juniper Networks, Inc.
Chapter 9: Installing Switch Components