Switch User Manual

Table 43: Power Specifications for a 3000 W AC Power Supply in an EX8200 Switch
SpecificationsItem
Operating range:
•
High-voltage line—200–240 VAC
NOTE: Low-voltage line input is not supported for 3000 W AC power supplies
on the EX8216 switch.
AC input voltage
50–60 HzAC input line frequency
•
High-voltage line—16 AAC input current rating
•
High-voltage line—3000 WAC output power
Related Topics AC Power Supply in an EX8200 Switch on page 40•
• AC Power Supply LEDs in an EX8200 Switch on page 46
• AC Power Cord Specifications for an EX8200 Switch on page 112
DC Power Specifications for EX8200 Switches
Table 44 on page 110 lists the power specifications for the 3000 W DC power supply used
in EX8216 switches.
Table 44: Power Specifications for a 3000 W DC Power Supply Used in an EX8216 Switch
SpecificationsItem
•
Minimum operating voltage: –40 VDC
•
Nominal operating voltage: –48 VDC
•
Operating voltage range: –40 VDC through –72 VDC
NOTE: If the input voltage from the DC power source drops below –37.5 VDC through –39.5
VDC, the switching platform automatically shuts down. During automatic shutdown, the
circuit remains active. When the input voltage returns to –43 VDC through –44 VDC, the
switch automatically starts up again and the system returns to normal operation within 30
minutes. No operator intervention is required.
DC input voltage
75 A maximum at nominal operating voltage (–48 VDC) for each input terminal.DC input current rating
3000 WOutput power
100 AInternal Fuse Protection
Table 45 on page 111 lists the power specifications for the 2000 W DC power supply used
in EX8208 switches.
Copyright © 2010, Juniper Networks, Inc.110
Complete Hardware Guide for EX8208 Ethernet Switches