Switch User Manual

Table 34: Optical Interface Support and Copper Interface Support for SFP Transceivers in
48-port SFP Line Cards Used in EX8200 Switches (continued)
SpecificationsEthernet Standard
EX-SFP-1FE-LHModel Number100Base-LH (or
100Base-ZX)
100 MbpsRate
LCConnector Type
DualFiber Count
1310 nmTransmitter Wavelength
–5 dBmMinimum Launch Power
0 dBmMaximum Launch Power
–32 dBmMinimum Receiver Sensitivity
–8 dBmMaximum Input Power
SMFFiber Type
9/125 µmCore/Cladding Size
–Modal Bandwidth
80 km (49.7 miles)Distance
Not availableDOM Support
Junos OS for EX Series switches, Release 10.2 or laterSoftware required
Related Topics 8-port SFP+ Line Card in an EX8200 Switch on page 30•
• 40-port SFP+ Line Card in an EX8200 Switch on page 31
• 48-port SFP Line Card in an EX8200 Switch on page 33
• 48-port RJ-45 Line Card in an EX8200 Switch on page 34
• Installing a Transceiver in an EX Series Switch on page 163
• Removing a Transceiver from an EX Series Switch on page 222
SFP+ Direct Attach Cables for EX Series Switches
Small form-factor pluggable plus transceiver (SFP+) direct attach copper cables, also
known as Twinax cables, are suitable for in-rack connections between servers and
83Copyright © 2010, Juniper Networks, Inc.
Chapter 3: Component Specifications