User's Manual

Indoor Mobility Point™ Quick Start Guide
7
Trapeze Networks
MP-522E Package Contents
The shipping carton for an MP-522E contains all of the items listed in the MP-422/432/522 with the
addition of 4 Omni-directional antennas.
The Trapeze-approved antennas listed in the table below can also be used with the MP-522E.
W arning!
FCC Caution
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (e.i.r.p) is not more
than that permitted for successful communication.
This device has been designed to operate with the antennas listed below, and having a
maximum gain of [23.5] dB. Antennas not included in this list or having a gain greater
than [23.5] dB are strictly prohibited for use with this device. The required antenna
impedance is 50 ohms.
The tested/certified antennas are equipped with Reverse-SMA or N-type jacks.
T-bar clamps
Mounting template
Mounting hardware
Mobility Point
Earthquake safety
mounting bracket
Four ANT-7360P-IN antennas