User's Manual

Indoor Mobility Point™ Quick Start Guide
36
Trapeze Networks
c. Turn over the universal mounting bracket, then align the bracket over the cable ports and the
four mounting posts as shown in Figure 1–31 below.
Figure 1–31. Step 1c—Turning Over the Bracket
d. Once the bracket is fully seated, lock the bracket onto the MP by inserting the lock/unlock tool
into the Lock hole on the MP as shown in below.
Figure 1–32. Step 1d—Locking the Bracket
2. Insert the Cat 5 cable(s) into the connector(s):
❑ For a single connection, use the connector for port 1.
❑ For redundancy, insert one cable into each connector.
3. Install the Kensington lock, if you plan to use one.
a. Loop the Kensington lock cable around an object that cannot be moved or damaged by a person
pulling on the cable.
b. Insert the key into the Kensington lock.
c. Insert the Kensington lock into the security slot on the MP.
d. Rotate the key right or left to secure the lock to the MP.
Lock