User's Manual

Indoor Mobility Point™ Quick Start Guide
35
Trapeze Networks
If the MP comes off the bracket, relock the device onto the bracket as described in step 10 on
page 33.
12. If the MP requires an external antenna, install and connect the antenna.
13. If the other ends of the Cat 5 cable(s) are not already connected and the link activated, go to .
Tabletop Installation
1. Reverse the universal mounting bracket:
a. Unlock the universal mounting bracket from the MP by inserting the lock/unlock tool into the
Unlock hole on the MP as shown in below.
Figure 1–29. Step 1a—Unlocking the Bracket
b. Remove the bracket as shown in Figure 1–30 below.
Figure 1–30. Step 1b—Removing the Bracket
!
Caution
Use the lock/unlock tool to unlock the MP. Do not use a screwdriver because it may cause
damage to the MP lock mechanism or electronic components. Do not use excessive force
when inserting a tool into the Unlock or Lock hole.