User's Manual

Indoor Mobility Point™ Quick Start Guide
34
Trapeze Networks
9. As shown in Figure 1–27, place the MP on the bracket, making sure to remove any slack that
occurs in the cable between the bracket and the MP.
Figure 1–27. Step 8—Cable Placement
10. Lock the MP onto the bracket by inserting the lock/unlock tool into the Lock hole on the MP as
shown below.
Figure 1–28. Step 9—Locking the Bracket
11. To ensure that the MP is fully locked onto the bracket, gently pull on the MP and attempt to rotate
it from side to side.
W arning!
To prevent possible damage to the MP, make sure the device is fully locked onto the
bracket before releasing it.
Universal mounting bracket
Cable
Lock