User's Manual

Indoor Mobility Point™ Quick Start Guide
27
Trapeze Networks
10. Lift the MP into place on the universal mounting bracket as shown in Figure 1–18.
Make sure the cable feeds properly into the ceiling as you lift the device, and does not become
trapped between the MP and the bracket.
Figure 1–18. Step 9—Placing the MP on the Bracket
11. Lock the MP onto the bracket by inserting a small-pointed instrument or a paperclip into the
Lock hole on the MP as shown in Figure 1–19 below.
Figure 1–19. Step 10—Locking the Bracket
12. To ensure that the MP is fully locked onto the bracket, gently pull down on the MP and attempt to
rotate it from side to side.
If the MP comes off the bracket, relock the device onto the bracket as described in step 11 on
page 26.
13. If the MP requires an external antenna, install and connect the antenna.
W arning!
To prevent possible damage to the MP, make sure the device is fully locked onto the
bracket before releasing it.