User's Manual

Indoor Mobility Point™ Quick Start Guide
20
Trapeze Networks
Figure 1–8. Step 7—Top View
b. Properly align the bracket for mounting by placing the bracket so the port connector opening is
to the left of the hole you cut for the cables.
c. Rotate the universal mounting bracket clockwise until the flanges snap into place on the T-bar
or clamp as shown below.
Figure 1–9. Step 7—Bottom View
T-bar
(Viewed from above ceiling tiles, looking down.)
Universal mounting
bracket
Port connector
opening
T-bar
Universal mounting bracketPort connector
opening