User's Manual

Indoor Mobility Point™ Quick Start Guide
19
Trapeze Networks
5. Unlock the universal mounting bracket from the MP by inserting the lock/unlock tool into the
Unlock hole on the MP as shown in Figure 1–6 below.
Figure 1–6. Step 5—Unlocking the Bracket
6. Remove the bracket as shown in Figure 1–7 below.
Figure 1–7. Step 6—Removing the Bracket
7. Install the universal mounting bracket as follows onto the T-bar or T-bar clamp.
a. As shown in Figure 1–8 below, place the universal mounting bracket against the T-bar or clamp
so that the two screw holes face downward and the two T-bar flanges face upward and are
adjacent to the T-bar edges.
!
Caution
D
Use a small-pointed instrument or a paperclip to unlock the MP. Do not use a
screwdriver because it may cause damage to the MP lock mechanism or electronic
components. Do not use excessive force when inserting a tool into the Unlock or
Lock hole.