Quick Start Guide

Indoor Mobility Point™ Quick Start Guide
20
Trapeze Networks
Figure 1–5. Step 4—Installing a T-bar Clamp
5. Unlock the universal mounting bracket from the MP by inserting the lock/unlock tool into the
Unlock hole on the MP as shown in Figure 1–6 below.
Figure 1–6. Step 5—Unlocking the Bracket
6. Remove the bracket as shown in Figure 1–7 below.
Figure 1–7. Step 6—Removing the Bracket
!
Caution
D
Use a small-pointed instrument or a paperclip to unlock the MP. Do not use a
screwdriver because it may cause damage to the MP lock mechanism or electronic
components. Do not use excessive force when inserting a tool into the Unlock or
Lock hole.
T-bar
T-bar clamp halves
Slide together