Quick Start Guide

Indoor Mobility Point™ Quick Start Guide
18
Trapeze Networks
10. Lift the MP into place on the universal mounting bracket as shown below.
Make sure the cable feeds properly into the ceiling as you lift the device, and does not become
trapped between the MP and the bracket.
11. Lock the MP onto the bracket by inserting the lock/unlock tool into the Lock hole on the MP and
push until you feel the internal bracket slide across.
12. To ensure that the MP is fully locked onto the bracket, gently pull down on the MP and attempt to
rotate it from side to side.
13. If the MP comes off the bracket, relock the device onto the bracket.
W arning!
To prevent possible damage to the MP, make sure the device is fully locked onto the
bracket before releasing it.