Quick Start Guide

Indoor Mobility Point™ Quick Start Guide
15
Trapeze Networks
MP-82 Ceiling Mount Instructions
Suspended Ceiling Installation — Flush Ceiling Tiles MP-82
1. Select an installation location centered over a T-bar in the ceiling.
2. Cut a hole as follows in the ceiling tile for the Cat 5 cable:
a. Place the mounting template over the area where you plan to install the MP.
b. Use the box cutter to cut along the line marking the opening for the port connectors.
c. Remove the mounting template and the material you cut from the ceiling panel.
3. Determine whether to install a T-bar clamp onto the ceiling T-bar:
Suspended ceiling—drop
ceiling tiles
Mounting template Yes
Universal mounting bracket Yes
T-bar clamp Yes
Box cutter No
Small screwdriver (3-millimeter or 1/8-inch) No
small-pointed instrument or a paperclip No
Junction box
Junction box No
Two #6-32 x 1-inch machine screws Yes
Universal mounting bracket Yes
Small screwdriver (3-millimeter or 1/8-inch) No
#2 Phillips-head screwdriver No
small-pointed instrument or a paperclip No
Solid wall or ceiling
Two #6 sheet metal screws and two drywall anchors Yes
Universal mounting bracket Yes
Hammer No
Small screwdriver (3-millimeter or 1/8-inch) No
#2 Phillips-head screwdriver No
small-pointed instrument or a paperclip No
Tabletop
Universal mounting bracket Yes
Small screwdriver (3-millimeter or 1/8-inch) No
small-pointed instrument or a paperclip No
Note:
Indoor MPs are UL2043 plenum rated, so it also can be installed in the space above
the ceiling if preferred.
Table 1– 3. Required Mounting Hardware and Tools
Mounting Option Required Hardware and Tools
Included with
the Product