User's Manual

MP Technical Specifications 3 – 1

MP Technical Specifications

This appendix lists the technical specifications for the Trapeze Networks Indoor MPs.

Table 3– 1

lists the mechanical and compliance specifications. (For detailed compliance information, see the

Trapeze Regulatory Information document.)

Table 3– 2, Table 3– 3, and Table 3– 4 list the radio

specifications.

Table 3– 5 lists the MAC address allocation scheme.

(For specifications for the MX , see the Trapeze Mobility Exchange Installation and Basic

Configuration Guide.)

802.11 a/b/g/n Features

❑ High performance 11 Mbps (802.11b) or 54Mbps (802.11a/g) or 300Mbps(802.11n) data rate

❑ Wi-Fi, WPA certificated interoperability

❑ WPA/WPA2 with PSK/802.1x with TKIP/AES

❑ 40-bit and 128-bit WEP

❑ Seamless roaming within the IEEE 802.11 a/b/g/n WLAN infrastructure.

❑ Adjustable output power support

❑ Interoperability with Trapeze Wireless Security Switch

❑ Dual auto-sensing 10/100/1000 Ethernet port, configured as MDI.

❑ Comply with IEEE 802.3, 802.3u and 802.3ab

❑ Support auto MDI/MDI-X

❑ PowerDsine(Microsemi) GigE PoE injector support

❑ 802.3af PoE compatability

Note:

This Listed Accessory is designed and approved to be used only with Trapeze

Networks Mobility Exchange (MX) models MX-216, MX-20, MX-8, and MXR-2.

(The MX-400, MX-2800, and MX-200s do not directly connect to the MP.)

Note:

The MP radios are disabled by default and can be enabled only by the system

administrator using the RingMaster management application or the MX’s

command-line interface (CLI).

Note:

The radio frequency band, operating channels, and transmit power depend on the

country of operation specified by the system administrator using RingMaster or the

MX CLI.