User's Manual

Installing and Connecting an Indoor MP
Installing an Indoor MP
Indoor Mobility Point Installation Guide
2 – 20
Figure 2–29. Step 1c—Turning Over the Bracket
d. Once the bracket is fully seated, lock the bracket onto the MP by inserting a small-pointed
instrument or a paperclip into the Lock hole on the MP as shown in
Figure 2–30.
Figure 2–30. Step 1d—Locking the Bracket
2. Attach the three rubber adhesive feet onto the universal mounting bracket, in the three
location circles, as shown in
Figure 2–31.
Figure 2–31. Step 2—Installing the Rubber Feet
Lock