User's Manual

I nst a lling a nd Conne ct ing a n I ndoor M P
Installing an Indoor MP
Installing and Connecting an Indoor MP 2 – 19
Tabletop Installation
(For required mounting hardware and tools, see
Table2– 1 on page2-4.)
1. Reverse the universal mounting bracket:
a. Unlock the universal mounting bracket from the MP by inserting a small-pointed
instrument or a paperclip into the Unlock hole on the MP as shown in
Figure 2–27.
Figure 2–27. Step 1a—Unlocking the Bracket
b. Remove the bracket as shown in
Figure 2–28.
Figure 2–28. Step 1b—Removing the Bracket
c. Turn over the universal mounting bracket, then align the bracket over the cable ports and
the four mounting posts as shown in
Figure 2–29.
!
Caution
Use a small-pointed instrument or a paperclip to unlock the MP. Do not use a
screwdriver because it may cause damage to the MP lock mechanism or electronic
components. Do not use excessive force when inserting a tool into the Unlock or Lock
hole.