User's Manual

Installing and Connecting an Indoor MP
Installing an Indoor MP
Indoor Mobility Point Installation Guide
2 – 6
Figure 2–3. Step 4—Installing a T-bar Clamp
5. Unlock the universal mounting bracket from the MP by inserting a small-pointed instrument
or a paperclip into the Unlock hole on the MP as shown in
Figure 2–4.
Figure 2–4. Step 5—Unlocking the Bracket
6. Remove the bracket as shown in
Figure 2–5.
Figure 2–5. Step 6—Removing the Bracket
!
Caution
D
Use a small-pointed instrument or a paperclip to unlock the MP. Do not use a
screwdriver because it may cause damage to the MP lock mechanism or electronic
components. Do not use excessive force when inserting a tool into the Unlock or
Lock hole.
T-bar
T-bar clamp halves
Slide together