User's Manual

Installing and Connecting an Indoor MP
Installing an Indoor MP
Indoor Mobility Point Installation Guide
2 – 4
Installing an Indoor MP
To install an Indoor MP, use one of the procedures in this section.
Installation Hardware and Tools
Table 2– 1 lists the mounting hardware and tools required for each type of installation.
Table 2– 1. Required Mounting Hardware and Tools
Mounting Option Required Hardware and Tools
Included with
the Product
Suspended ceiling—flush
ceiling tiles
Mounting template Yes
Universal mounting bracket Yes
T-bar clamp — A T-bar clamp is not required for a 15/16-inch
(23.9-mm) T-bar ceiling with flush ceiling tiles.
Yes
Box cutter No
Small screwdriver (1/8-inch or 3-mm) No
small-pointed instrument or a paperclip No
Suspended ceiling—drop
ceiling tiles
Mounting template Yes
Universal mounting bracket Yes
T-bar clamp Yes
Box cutter No
Small screwdriver (1/8-inch or 3-mm) No
small-pointed instrument or a paperclip No
Junction box
Junction box No
Two #6-32 x 1-inch machine screws Yes
Universal mounting bracket Yes
Small screwdriver (1/8-inch or 3-mm) No
#2 Phillips-head screwdriver No
small-pointed instrument or a paperclip No
Solid wall or ceiling
Two #6 sheet metal screws and two drywall anchors Yes
Universal mounting bracket Yes
Hammer No
Small screwdriver (1/8-inch or 3-mm) No
#2 Phillips-head screwdriver No
small-pointed instrument or a paperclip No
Tabletop
Universal mounting bracket Yes
Three adhesive rubber feet Yes
Small screwdriver (1/8-inch or 3-mm) No
small-pointed instrument or a paperclip No