User's Manual

MP Overvie w
External Hardware Features
MP Overview 1 – 5
Figure 1–5 shows some of the 802.11b/g antennas.
Figure 1–5. External 802.11b/g Antennas
The 802.11a external antennas look similar to the 802.11b/g model ANT-1180, but each has a
reflector plate specific to the model number. You can identify an 802.11a external antenna model
by looking on the back of the reflector plate. Do not reverse or remove the reflector plate. It is
required for antenna operation.
Each antenna comes with a connector cable, mounting hardware, and installation instructions.
Kensington Security Slot
All models have a slot for attachment of a Kensington security cable. The cable is not included
with the MP but can be ordered separately.
MP Mounting Options
You can mount an MP on any of the following types of surfaces:
Suspended T-bar ceiling
Junction box
Solid surface wall or ceiling
Tabletop
!
Caution
The external connectors on the MP are labeled: 11B/G and 11A. Each connector is a
standard SMA connector. Make sure you attach the antenna to the correct connector.
Note:
Operation in the band 5.15–5.25 GHz is restricted to indoor use only.
Model ANT-1060
Model ANT-1180
Model ANT-1120