User's Manual

MP Overview
External Hardware Features
Indoor Mobility Point Installation Guide
1 – 4
External Antenna Connectors
The Indoor MPs (except for the MP-432) has connectors for attaching optional external antennas.
(See
Figure 1–2.) Table 1– 1 lists the external antenna models.
Note:
The numbers in parentheses in the table below are the numbers that appear on the
back of an 802.11a antenna reflector plate. To verify an 802.11a external antenna
model number, look for the number in parentheses
Table 1– 1. Trapeze External Antenna Models
Model Type Gain
Beamwidth
Horizontal Vertical
ANT-7360
802.11a 8 dBi 360° 15°
802.11b/g 6 dBi 360° 25°
ANT-7360-OUT (MP-422 only)
802.11a 8 dBi 360° 15°
802.11b/g 6 dBi 360° 22°
ANT-5060 (ASTN6S)
802.11a 14.5 dBi 60° 14°
ANT-5120 (ASTN6T)
802.11a 12.5 dBi 120° 14°
ANT-5180 (ASTN6H)
802.11a 10.8 dBi 180° 14°
ANT-1060
802.11b/g 10 dBi 60° 65°
ANT-1120
802.11b/g 7 dBi 120° 60°
ANT-1180
802.11b/g 6 dBi 180° 40°
Note:
The Indoor MP radios are certified for use only with these external antennas.