User's Manual

MP-622 Technical Specifications 4 – 1

MP-622 Technical Specifications

This chapter lists the technical specifications for the Trapeze Networks MP-622.

For detailed compliance information, see the Regulatory Information document.

Table 4– 1 lists the mechanical and compliance specifications. Table 4– 2 lists the MAC address

allocation scheme. The remaining tables list the specifications and link budgets for the external

antennas.

(For specifications for the MX, see the Mobility Exchange Installation and Basic Configuration

Guide.)

MP-622 Mechanical and Compliance Specifications

Table 4– 1 lists the mechanical and compliance specifications for the MP-622.

Note:

The Trapeze Regulatory Information document is located at:

http://www.trapezenetworks.com/support/contact_support/ and can be

downloaded in PDF format.

Note:

This Listed Accessory is designed and approved to be used only with Trapeze

Networks Mobility Exchange (MX) models MX-20, MX-8, MX-216, and MXR-2. (The

MX-200, MX-2800 and MX-400 switches do not directly connect to the MP.)

Note:

The MP radios are disabled by default and can be enabled only by the system

administrator using the RingMaster management application or the MX switch’s

command-line interface (CLI).

Note:

The radio frequency band, operating channels, and transmit power depend on the

country of operation specified by the system administrator using RingMaster or the

MX switch’s CLI.

Table 4– 1. MP-622 Mechanical and Compliance Specifications

Specification Description

Maximum Channels (Outdoor) Based on the country of operation specified by the system

administrator

Data Rates 802.11a:

6, 9, 12, 18, 24, 36, 48, 54 Mbps per channel

802.11g:

6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps per channel

802.11b:

1, 2, 5.5, 11 Mbps per channel