User Manual
Table Of Contents
- Customer Service
- Introducing the Trapeze Networks Mobility System
- MP-620 Overview
- Installing and Connecting an MP-620 Access Point
- MP-620 Technical Specifications
- Cables and Pinouts
- Index
8-Pin DIN Connector Pinout
Appendix B
Trapeze MP-620 Installation Guide
46
8-Pin DIN Connector Pinout
The Ethernet cable from the power injector connects to an 8-pin DIN connector on
the MP-620. This connector is described in the following figure and table.
Figure 16. 8-Pin Ethernet DIN Connector
Table 10. 8-Pin DIN Ethernet Port Pinout
Pin Signal Name
1 Transmit Data plus (TD+)
2 Transmit Data minus (TD-)
3 Receive Data plus (RD+)
4 +48 VDC power
5 +48 VDC power
6 Receive Data minus (RD-)
7 Return power
8 Return power
Note: The “+” and “-” signs
represent the polarity of the wires
that make up each wire pair.
1
7
2
3
4
5
8
6