User Manual

Table Of Contents

MP-620 Technical Specifications

This appendix lists the technical specifications for the Trapeze Networks MP-620

access point. Table 2 lists the mechanical and compliance specifications. (For

detailed compliance information, see the Trapeze Regulatory Information

document.) Table 3 lists the MAC address allocation scheme. The remaining

tables list the specifications and link budgets for the external antennas.

(For specifications for the MX switch, see the Trapeze Mobility Exchange

Installation and Basic Configuration Guide.)

Note. This Listed Accessory is designed and approved to be used only with

Trapeze Networks Mobility Exchange (MX) models MX-20, MX-8, MX-216, and

MXR-2. (The MX-200 and MX-400 switches do not directly connect to the MP.)

Note. The MP radios are disabled by default and can be enabled only by the

system administrator using the RingMaster management application or the MX

switch’s command-line interface (CLI).

Note. The radio frequency band, operating channels, and transmit power

depend on the country of operation specified by the system administrator using

RingMaster or the MX switch’s CLI.