User Manual

Installing and Connecting an MP-620 Access Point
15
3
Installing and Connecting
an MP-620 Access Point
Installation Requirements and
Recommendations
For best results, follow these requirements and recommendations before installing
an MP-620 access point.
RingMaster Network Plan and Work Orders
If you are using RingMaster to plan your Trapeze Networks Mobility System
installation, you might want to create and verify a network plan for the entire
Trapeze network installation and generate an MP work order, before installing MP
access points. A network plan and the MP work orders generated from it provide
the following information about MP access point installation and configuration:
Installation Requirements and Recommendations . . . . . . . . . . . . . . . . . . . . . 15
Installing an MP-620 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Connecting an MP to an MX Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Note. Before installing an MP access point, you might need to generate a
network plan and an MP work order with RingMaster. (See “RingMaster Network
Plan and Work Orders” on page 15.)