User Manual

External Hardware Features
Chapter 2
Trapeze MP-620 Installation Guide
10
External antennas connect to the N-type RF connectors on the MP-620 using the
provided coaxial cables.
Ethernet Port
The MP-620 has one 10BASE-T/100BASE-TX 8-pin DIN port that connects to
the power injector module using the included Ethernet cable. The Ethernet port
connection provides power to the MP-620 as well as a data link to the local
network.
Table 1. External Antenna Options
Antenna Type Gain (dBi)
HPBW*
Horizontal
HPBW*
Vertical
Polarization
5 GHz
Omnidirectional
8 360 12 Linear,
vertical
5 GHz
120-Degree
Sector
13.5 120 6 Linear,
vertical
5 GHz
18-Degree Panel
18 18 18 Linear,
vertical
2.4 GHz
120-Degree
Sector
10 120 15 Linear,
vertical
2.4 GHz
Omnidirectional
8 360 15 Linear,
vertical
* Half-power beam width in degrees
Note. The power injector module does not support Power over Ethernet (PoE)
based on the IEEE 802.3af standard. The MP-620 must always be powered on
by being connected to the power injector module.