User Manual

Connect External Antenna(s)
Installing a Trapeze Networks™ Model MP-620 Mobility Point™ Access Point
6
Figure 2. Attaching the Bracket Using a Steel Band Clamp
Using the Wall-Mounting Bracket
Perform the following steps to mount the unit to a wall using the wall-mounting bracket:
1 Always attach the bracket to a wall with the open end of the mounting grooves facing up (see
following figure).
Figure 3. Wall-Mounting Bracket
2 Position the bracket in the intended location and mark the position of the three mounting screw holes.
3 Drill three holes in the wall that match the screws and wall plugs included in the bracket kit, then
secure the bracket to the wall.
4 Use the included nuts to tightly secure the MP-620 to the bracket.
Connect External Antenna(s)
1 Mount the external antenna to the same supporting structure as the MP-620, within 3 m (10 ft)
distance, using the bracket supplied in the antenna package.
2 Connect the antenna to the MP-620’s N-type connector using the RF coaxial cable provided in the
antenna package.
Steel Band Clamp
(Not included)
Mounting Grooves