User's Manual

Indoor Mobility Point™ Quick Start Guide

Trapeze Networks

Figure 1–2. Do Not Use a Cat 5 Cable with an Uneven Sheath

Installing an Indoor Mobility Point

To install an MP-432/422/372, use one of the procedures in this section.

Installation Hardware and Tools

Table 1– 1. Required Mounting Hardware and Tools—Model MP-422

Mounting Option Required Hardware and Tools

Included with the

Product

Suspended ceiling—flush

ceiling tiles

Mounting template Yes

Universal mounting bracket Yes

T-bar clamp

Note: A T-bar clamp is not required for

a 15/16-inch (23.9-mm) T-bar ceiling

with flush ceiling tiles.

Yes

Box cutter No

Small screwdriver (1/8-inch or 3-mm) No

Small-pointed instrument or a paperclip No

Suspended ceiling—drop

ceiling tiles

Mounting template Yes

Universal mounting bracket Yes

T-bar clamp Yes

Box cutter No

Small screwdriver (1/8-inch or 3-mm) No

Small-pointed instrument or a paperclip No

Junction box

Junction box No

Two #6-32 x 1-inch machine screws Yes

Universal mounting bracket Yes

Small screwdriver (1/8-inch or 3-mm) No

Small-pointed instrument or a paperclip No

#2 Phillips-head screwdriver No

Uneven sheath