User's Manual

Indoor Mobility Point™ Quick Start Guide
5
Trapeze Networks
Unpacking an MP
The shipping carton for an MP-432/422/372 access point contains the following items:
1. One MP access point
2. Mounting kit:
One universal mounting bracket (attached to the MP)
One paper mounting template (used for marking cutting areas and screw holes)
One two-piece (9/16-inch) 14.2-mm T-bar clamp
One two-piece (5/8-inch) 15.9-mm T-bar clamp
One two-piece (15/16-inch) 23.9-mm T-bar clamp
Two #6 sheet metal screws and two drywall anchors
Three adhesive rubber feet
3. One documentation pack that includes quick mounting instructions (not shown).
Figure 1–1. MP-422 Shipping Carton Contents
Note:
The Trapeze Regulatory Guide is located at
http://www.trapezenetworks.com/support/contact_support/ and can be downloaded in
PDF format.
T-bar clamps
Mounting template
Rubber feet
Universal
mounting bracket
Mounting hardware
Mobility point
840-9502-0001