User's Manual

Indoor Mobility Point™ Quick Start Guide
27
Trapeze Networks
5. Attach the three rubber adhesive feet onto the universal mounting bracket, in the three location
circles, as shown in Figure 1–32.
Figure 1–32. Step 2—Installing the Rubber Feet
6. Insert the Cat 5 cable(s) into the connector(s):
For a single connection, use the connector for port 1.
For redundancy, insert one cable into each connector.
7. Install the Kensington lock, if you plan to use one.
a. Loop the Kensington lock’s cable around an object that cannot be moved or damaged by a
person pulling on the cable.
b. Insert the key into the Kensington lock.
c. Insert the Kensington lock into the security slot on the MP.
d. Rotate the key right or left to secure the lock to the MP.
e. Pull on the lock to verify that it is secured to the MP.
f. Remove the key.
8. Place the MP access point in the desired location on the table.
9. If the MP requires an external antenna, install and connect the antenna. (See “Connecting an MP
to an External Antenna” .)