User's Manual

Indoor Mobility Point™ Quick Start Guide
25
Trapeze Networks
12.If the MP requires an external antenna, install and connect the antenna. (See “Connecting an MP
to an External Antenna” .)
Tabletop Installation
For required mounting hardware and tools, see Table 1– 1 on page 8.
1. Reverse the universal mounting bracket:
Unlock the universal mounting bracket from the MP access point by inserting a small-pointed
instrument or a paperclip into the Unlock hole on the MP as shown in Figure 1–28.
Figure 1–28. Step 1a—Unlocking the Bracket
2. Remove the bracket as shown in Figure 1–29.
Figure 1–29. Step 1b—Removing the Bracket
3. Turn over the universal mounting bracket, then align the bracket over the cable ports and the four
mounting posts as shown in Figure 1–30.
!
Caution
D
Use a small-pointed instrument or a paperclip to unlock the bracket. Do not use a
screwdriver because it may cause damage to the MP lock mechanism or electronic
components. Do not use excessive force when inserting a tool into the Unlock or Lock
hole.